23 November 2024 in Computer Methods in Applied Mechanics and Engineering
25 October 2023 in Computational Mechanics
This work is concerned with an adaptive reduced order model of modular structures assembled from parameter-dependent substructures. The substructures are reduced by proper orthogonal decomposition (POD) and connected by means of a tied contact formulation. We present a method to adapt the matrices of the substructures to parameter changes. We employ interpolation on Grassmann manifolds for the parametric adaption of the projection matrices. For the adaptation of the stiffness matrices, we use the direct empirical interpolation method (DEIM). Manifold interpolation of the reduced stiffness matrices, cannot be applied here since it would require semi-positive definiteness, which is here not fulfilled because of necessary rigid body motion modes. The novelty of this work is the application of these interpolation methods to the special problem class of POD-based tied contact model order reduction. Furthermore, we show a methodology to compute significant snapshots on the substructure level to compute a POD basis that can be used in different global structures.
27 April 2025 in International Journal for Numerical Methods in Engineering
In this work, we present a model‐order reduction technique for nonlinear structures assembled from components. The reduced‐ order model is constructed by reducing the substructures with proper orthogonal decomposition and connecting them by a mortar‐tied contact formulation. The substructure projection matrices are computed by the proper orthogonal decomposition (POD) method from snapshots computed on the substructure level. The snapshots are computed using Latin hypercube sampling based on a parametrization of the boundary conditions. In numerical examples, we show the accuracy and efficiency of the method for nonlinear problems involving material and geometric nonlinearities as well as non‐matching meshes. The method can predict solutions of new systems with varying boundary conditions and material behaviors.
5 January 2026 in Computer Methods in Applied Mechanics and Engineering
22 August 2024 in Acta Biomaterialia
Plant leaves have to deal with various environmental influences. While the mechanical properties of petiole and lamina are generally well studied, only few studies focused on the properties of the transition zone joining petiole and lamina. Especially in peltate leaves, characterised by the attachment of the petiole to the abaxial side of the lamina, the 3D leaf architecture imposes specific mechanical stresses on the petiole and petiole-lamina transition zone. Several principles of internal anatomical organisation have been identified. Since the mechanical characterisation of the transition zone by direct measurements is difficult, we explored the mechanical properties and load-bearing mechanisms by finite-element simulations. We simulate the petiole-lamina transition zone with five different fibre models that were abstracted from CT data. For comparison, three different load cases were defined and tested in the simulation. In the proposed model, the fibres are represented in a smeared sense, where we considered transverse isotropic behaviour in elements containing fibres. In a pre-processing step, we determined the fibre content, direction, and dispersion and fed them into our model. The simulations show that initially, matrix and fibres carry the load together. After relaxation of the stresses in the matrix, the fibres carry most of the load. Load dissipation and stiffness differ according to fibre arrangement and depend, among other things, on orientation and cross-linking of the fibres and fibre amount. Even though the presented method is a simplified approach, it is able to show the different load-bearing capacities of the presented fibre arrangements. STATEMENT OF SIGNIFICANCE: In plant leaves, the petiole-lamina transition zone is an important structural element facilitating water and nutrient transport, as well as load dissipation from the lamina into the petiole. Especially in peltate leaves, the 3D leaf architecture imposes specific mechanical stresses on the petiole-lamina transition zone. This study aims at investigating its mechanical behaviour using finite-element simulations. The proposed continuum mechanical anisotropic viscoelastic material model is able to simulate the transition zone under different loads while also considering different fibre arrangements. The simulations highlight the load-bearing mechanisms of different fibre organisations, show the mechanical significance of the petiole-lamina transition zone and can be used in the design of a future biomimetic junction in construction.
15 September 2023 in Proceedings in Applied Mathematics and Mechanics
In this contribution, we present a continuum mechanical transversely isotropic viscoelastic material model at finite deformations to model the mechanical behavior of the plant tissues of peltate leaves of Stephania japonica. Not many research efforts have been devoted to investigate the mechanical properties of this type of leaf shape. The model is obtained by postulating a particular Helmholtz free energy, which is split additively into an elastic and an inelastic part. Both parts of the energy depend on the structural tensors to account for the transversely isotropic material behavior. The evolution equations are chosen in a physically meaningful way that always fulfills the second law of thermodynamics. The numerical example reveals that the proposed model is capable of predicting the mechanical response of the real plant tissues at different loading rates.