In the field of material modeling, thermoplastic polymers are often studied because of their complex material behavior and their prevalence in industry applications due to their low cost and wide range of applications. Nowadays, where reusability becomes more and more important, materials which can undergo reversible thermomechanical deformations are appealing for, e.g., the construction of car body components. To predict such complex forming processes with multiple influencing factors, such as temperature, strain rate or underlying material morphology, model formulations are needed that account for these influences simultaneously and are validated against experimental data. Unfortunately, up to now only a few contributions are available which consider all these phenomena. In addition, the range of process parameters considered is often narrow due to the experimental effort required for testing. This usually results in limited predictive capabilities of the model. To overcome these limitations, in this work, a thermo-mechanically coupled material model is developed that accounts for the underlying morphology in terms of the degree of crystallinity (DOC). The model formulation is derived in a thermodynamically consistent manner, incorporating coupled nonlinear visco-elastic and elasto-plastic material behavior at finite strains. To characterize and further validate the model, mechanical as well as thermal experiments are conducted for polyamide 6 (PA6). Here, a blending strategy of PA6 together with an amorphous co-polymer is introduced during specimen production to achieve a wider range of stable DOCs(approximately 15%). The model formulation is successfully applied to experimental results and its predictions are in good agreement with experimental observations.
22 November 2023 in Continuum Mechanics and Thermodynamics
Thermoforming of continuous fiber-reinforced plastics made of semi-crystalline thermoplastics has gained significant interest due to its potential for producing lightweight and high-strength components for various applications. Before thermoforming, a laminate is heated to a temperature beyond the melting point of the thermoplastic. During the subsequent forming process, the laminate is continuously cooled, which triggers non-isothermal crystallization in the semi-crystalline matrix material. In this context, the study of crystallization kinetics is crucial in identifying phase transition, analyzing exothermic latent heat during crystallization and determining inhomogeneous crystallinity distribution caused by uneven cooling in the laminate’s thickness direction. This contribution primarily deals with experimental investigations, modeling and finite element simulations for characterizing the crystallization kinetics in the matrix material, Polyamide 6 and investigating the aforementioned factors. To model the crystallization kinetics, an extended form of the Avrami model, known as the modified Nakamura–Ziabicki model, is adopted. The parameters for the modified Nakamura–Ziabicki model, which depend on the local cooling rates, are identified based on fitting the model to flash DSC (differential scanning calorimetry with high cooling rates) and standard DSC non-isothermal cooling experiments. Finally, the model is implemented into the commercial FE software COMSOL Multiphysics® and the crystallinity evolution in the laminate is simulated for the process-relevant die and laminate temperatures and laminate thicknesses.
18 September 2024 in Proceedings in Applied Mathematics and Mechanics
The characterization of the material behavior of inelastic materials requires a high degree of expert knowledge to identify and constitutively describe the material response. In addition, specific models are usually pre‐selected in the course of characterization and only the best parameters for these specific models are determined, but therefore not necessarily the best models. Unfortunately, a more general description of these pre‐selected models results in an increased effort during characterization, which is barely practicable by hand. This is where machine learning algorithms may help us. To get the best of both worlds, powerful machine learning and sound thermodynamic considerations, inelastic Constitutive Artificial Neural Networks (iCANNs) discover generic formulations of the Helmholtz free energy and pseudo potential. Constitutive relations guide us towards thermodynamically consistent descriptions of stresses and inelastic strains; a concept that is applicable to a wide range of inelastic phenomena from viscoelasticity, elastoplasticity, phase transformations to growth and remodeling of living tissues. Here, we equip the original iCANN framework to guarantee polyconvexity a priori, which ensures at least one minimizing deformation. We investigate the ability of our iCANN to identify the material behavior of a viscoelastic polymer at different stretch levels and strain rates. We made our source code, data, and example accessible to the public at https://doi.org/10.5281/zenodo.11084354.
22 April 2025 in International Journal of Plasticity