In this work, the synthesis of a composite material based on hydroxyapatite (HAp) and zinc oxide (ZnO) is reported. Two types of synthesis were evaluated, in order to know which of them allows to obtain a homogeneous composite material of HAp and ZnO, since making a composite material implies that two or more compounds must be integrated and do not separated; the HAp will be obtained from eggshell residue, ZnO will be synthesized by Sol-Gel and electrolysis; in the ZnO obtention, the previously synthesized HAp was incorporated and it is followed by a thermal treatment obtain the oxide. To evaluated the incorporation of ZnO with hydroxyapatite, Scanning Electron Microscopy, Elemental Analysis and Mapping by Energy Dispersive Spectrometry, Infrared Spectroscopy Analysis and X-ray Diffraction were performed. These two synthesis methods are aiming to obtain a homogeneous material, establishing a methodology to produce the material composite, as well as improve the photocatalytic properties.
Currently, new materials are being developed to remove contaminants from wastewater by combining materials to improve their individual properties. This chapter describes the production of the zinc oxide (ZnO) and carbon composite. The ZnO was synthesized by electrolysis, adding Spend Coffee Grounds (SCG) to the electrolytic medium, and finally calcined at 400 °C for 30 min. ZnO, carbon, and the composite were synthesized and characterized. Scanning Electron Microscopy found that ZnO deposits in the pores of the carbon; Infrared Spectroscopy identified bonds associated with carbon and ZnO; X Ray Diffraction yielded a diffractogram with lower intensity compared to that of ZnO (JPDS-361451), due to the synthesis of amorphous carbon; μ-RAMAN Spectroscopy detected characteristic bonds of both materials; finally, the isoelectric point of the composite is 7.3, which will allows working with sorption in neutral systems.
In this work, the synthesis, characterization, and evaluation of the photocatalytic properties of ZrO₂ are reported, which is used for the photocatalytic degradation of turmeric using UV light. The technique used for the preparation of zirconium dioxide is the sol-gel method. The samples were characterized using energy dispersive spectroscopy (EDS) to determine the chemical composition, and Scanning Electron Microscopy (SEM) was used to study the surface morphology. The chemical composition and crystalline phases present were analyzed with µ-Raman spectroscopy. The identification of crystalline planes was performed through X-Ray Diffraction. The synthesized ZrO₂ is composed solely of Zr and O, with no contaminants detected. No predominant type of morphology was found. Structural analyses revealed the phases present in each sample, which are: monoclinic, tetragonal, and a mixture of phases (monoclinic/tetragonal).