27 March 2009 in IEEE Transactions on Automatic Control
This paper addresses the problem of Wiener system identification. The underlying linear subsystem is stable but not necessarily parametric. The nonlinear element in turn is allowed to be nonparametric, noninvertible, and nonsmooth. As Wiener models are uniquely defined up to an uncertain multiplicative factor, it makes sense to start the frequency identification process estimating the system phase (which is common to all models). To this end, a consistent estimator is designed using analytic geometry tools. Accordingly, the system frequency behavior is characterized by a family of Lissajous curves. Interestingly, all these curves are candidates to modelling the system nonlinearity, but the most convenient one is the less spread of them. Finally, the frequency gain is in turn consistently estimated optimizing an appropriate cost function involving the obtained phase and nonlinearity estimates.
13 February 2009 in IEEE Transactions on Circuits and Systems I: Regular Papers
We are considering the problem of controlling a DC-DC switched power converter of the Buck type. The converter involves an inherent control limitation; accordingly the control signal (duty ratio) can only take values in the interval (0, 1) . In the relevant literature, such a physical control limitation is generally not taken into account when designing the converter regulators. This is only dealt with in the control implementation stage, placing an isolated limiter between the (linear) controller and the controlled system. Furthermore, the presence of such a limiter is generally ignored when analyzing the closed-loop control system. In the present paper, the control signal limitation is dealt with using a nonlinear regulator that involves an internal limiter. The resulting closed-loop control system is shown to be equivalent to a nonlinear feedback involving a linear dynamics block in closed-loop with a nonlinear static element. Using absolute stability tools, sufficient conditions are established for the involved feedback to be L 2 -stable. If these conditions are respected when choosing the control design parameters then the regulator meets its objectives (closed-loop stability and output reference tracking). It is worth noting that, though the focus is made on a specific power converter, the paper includes an important theoretical dimension that may be of general interest.
1 January 2000 in European Journal of Control
1 August 2004 in IFAC Proceedings Volumes