Daniel W. Wilson

Daniel W. Wilson

Auto-generated profile, based on publicly available information

Daniel W. Wilson

Department of Civil and Environmental Engineering, University of California, Davis, CA, USA

Research Focus & Metrics

Academic Career Length

34Years (1993-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 1999 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
RBRoss W Boulanger
Ross W Boulanger
CCChristina J. Curras
Christina J. Curras
BKBruce L. Kutter
Bruce L. Kutter
DWDaniel W. Wilson
Daniel W. Wilson
AAAbbas Abghari
Abbas Abghari
A dynamic beam on a nonlinear Winkler foundation (or “dynamic p-y”) analysis method for analyzing seismic soil-pile-structure interaction was evaluated against the results of a series of dynamic centrifuge model tests. The centrifuge tests included two different single-pile-supported structures subjected to nine different earthquake events with peak accelerations ranging from 0.02 to 0.7g. The soil profile consisted of soft clay overlying dense sand. Site response and dynamic p-y analyses are described. Input parameters were selected based on existing engineering practices. Reasonably good agreement was obtained between calculated and recorded responses for both structural models in all earthquake events. Sensitivity of the results to dynamic p-y model parameters and site response calculations are evaluated. These results provide experimental support for the use of dynamic p-y analysis methods in seismic soil-pile-structure interaction problems.

1 January 2010 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
SDShideh Dashti
Shideh Dashti
JBJonathan D. Bray
Jonathan D. Bray
JPJuan M. Pestana
Juan M. Pestana
MRMichael Riemer
Michael Riemer
DWDan Wilson
Dan Wilson
Seismically induced settlement of buildings with shallow foundations on liquefiable soils has resulted in significant damage in recent earthquakes. Engineers still largely estimate seismic building settlement using procedures developed to calculate postliquefaction reconsolidation settlement in the free-field. A series of centrifuge experiments involving buildings situated atop a layered soil deposit have been performed to identify the mechanisms involved in liquefaction-induced building settlement. Previous studies of this problem have identified important factors including shaking intensity, the liquefiable soil’s relative density and thickness, and the building’s weight and width. Centrifuge test results indicate that building settlement is not proportional to the thickness of the liquefiable layer and that most of this settlement occurs during earthquake strong shaking. Building-induced shear deformations combined with localized volumetric strains during partially drained cyclic loading are the domina...

1 July 2010 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
SDShideh Dashti
Shideh Dashti
JBJonathan D. Bray
Jonathan D. Bray
JPJuan M. Pestana
Juan M. Pestana
MRMichael Riemer
Michael Riemer
DWDan Wilson
Dan Wilson
The effective application of liquefaction mitigation techniques requires an improved understanding of the development and consequences of liquefaction. Centrifuge experiments were performed to study the dominant mechanisms of seismically induced settlement of buildings with rigid mat foundations on thin deposits of liquefiable sand. The relative importance of key settlement mechanisms was evaluated by using mitigation techniques to minimize some of their respective contributions. The relative importance of settlement mechanisms was shown to depend on the characteristics of the earthquake motion, liquefiable soil, and building. The initiation, rate, and amount of liquefaction-induced building settlement depended greatly on the rate of ground shaking. Engineering design procedures should incorporate this important feature of earthquake shaking, which may be represented by the time rate of Arias intensity (i.e., the shaking intensity rate). In these experiments, installation of an independent, in-ground, per...

1 October 2000 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
DWDaniel W. Wilson
Daniel W. Wilson
RBRoss W Boulanger
Ross W Boulanger
BKBruce L. Kutter
Bruce L. Kutter
This paper presents results from a study of the dynamic response of pile foundations in liquefying sand during seismic loading. The study included a series of dynamic centrifuge tests of pile-supported structures and the back-calculation of time histories for the lateral resistance p and relative displacement y between a pile and the free-field soil. Details of the centrifuge experiments and the procedures used to back-calculate p and y time histories are described. The back-calculated p-y time histories provide a concise representation of the experimental results and can be compared to the equivalent p-y behavior predicted by soil-pile interaction analysis methods. The observed p-y behavior provides insight into the mechanisms of soil-pile interaction in liquefying sand, showing characteristics that are consistent with the undrained cyclic loading behavior of saturated sand, including the effects of relative density, cyclic degradation, pore-pressure generation, prior displacement (strain) history, and phase transformation behavior.

1 May 2005 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
AEAhmed Elgamal
Ahmed Elgamal
ZYZhaohui Yang
Zhaohui Yang
TLTao Lai
Tao Lai
BKBruce L. Kutter
Bruce L. Kutter
DWDaniel W. Wilson
Daniel W. Wilson
A highly instrumented centrifuge experiment was conducted at the Univ. of California at Davis, to investigate the seismic response of a saturated dense sand stratum. Nevada sand at about 100% relative density was employed in a laminated (flexible shear beam) container to simulate one-dimensional site response. Among the total of 27 imparted earthquake-like shaking events, peak accelerations near ground surface ranged from 0.03 to 1.7g (in prototype scale), covering linear to highly nonlinear scenarios. This comprehensive set of recorded downhole accelerations is utilized herein to identify variation of shear modulus and damping ratio with shear strain amplitude. The estimated modulus reduction and damping ratio display a confinement dependence. At shear strains below about 0.2%, modulus variation is found in reasonable agreement with the formulae of Hardin–Drnevich and the modulus reduction bounds of Seed–Idriss, while damping is generally higher. At shear strains larger than 0.2%, the shear-induced dilation tendency maintained secant shear modulus at about 20% of its initial value, with a 20% damping ratio approximately. In earlier laboratory experimental studies on loose to medium-dense sands, Vucetic and Matasovic also reported similar trends. Based on the findings, a two-phase (solid and fluid) fully coupled nonlinear finite element program is calibrated and used to conduct numerical simulations of representative weak to strong shaking events. The computational results are in good agreement with the recorded counterparts, and satisfactorily reproduce the important dilation effects.

1 October 2019 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
KDKathleen M. Darby
Kathleen M. Darby
GHGabby L. Hernandez
Gabby L. Hernandez
JDJason DeJong
Jason DeJong
RBRoss W Boulanger
Ross W Boulanger
MGMichael G. Gomez
Michael G. Gomez
DWDaniel W. Wilson
Daniel W. Wilson