Microbially induced calcite precipitation (MICP) is a bio-mediated cementation process that improves the geotechnical properties of soils through the precipitation of calcite at soil particle contacts. This study presents a field-scale, surficial application of MICP to improve the erosion resistance of loose sand deposits and provide surface stabilisation for dust control and future re-vegetation. Three test plots were treated with a bacterial culture and nutrient solutions at varying concentrations, and a fourth test plot served as a control. Improvement was assessed to a depth of 40 cm using dynamic cone penetration (DCP) testing and calcite content measurements. The most improved test plot received the lowest concentrations of urea and calcium chloride and developed a stiff crust measuring 2·5 cm thick, which exhibited increased resistance to erosion. DCP testing and calcite content measurements indicated improvement to a depth of approximately 28 cm near the targeted depth of 30 cm. The results suggest that further optimisation of solutions and techniques could render MICP viable for larger-scale applications.
1 May 2017 in Journal of Geotechnical and Geoenvironmental Engineering
Microbially induced calcite precipitation (MICP) is a promising biocementation process that can improve the geotechnical properties of granular soils through the precipitation of calcite. In this study, a large-scale biocementation experiment was completed to evaluate differences in improvement obtained using a bioaugmentation approach with S. pasteurii and a biostimulation approach, which stimulated native ureolytic microorganisms to complete the process. Two identical 1.7-m-diameter soil tank specimens containing a 0.3-m-thick layer of sand were treated using three wells at a well-to-well spacing of 1.2 m. Treatments were applied daily over 12 days and were designed to evaluate differences between tanks by creating a nonuniform spatial distribution of improvement. During treatment, shear wave velocity and biogeochemical changes were monitored spatially and temporally. Post-treatment, cone penetration tests were completed to assess improvement, and samples were obtained for calcite content measur...
1 January 2018 in Journal of Geotechnical and Geoenvironmental Engineering
Microbially induced calcite precipitation (MICP) is a biomediated cementation process that uses natural microbial enzymatic activity to improve the geotechnical properties of granular soils. In this study, two sets of experiments are completed using soil samples obtained from different depths to evaluate the feasibility of stimulating native ureolytic microorganisms for MICP at depths relevant to geotechnical applications. Batch and column experiments completed using five different stimulation solutions demonstrate that stimulation of native microbial ureolysis is improved with an enhanced stimulation solution, which differs from a standard stimulation solution used in previous studies through initial solution pH adjustment to 9.0 and higher concentrations of ammonium chloride and yeast extract of 100 mM and , respectively. A sterile sampling and column testing program is completed using soil materials obtained at shallow (2 m), middle (5.9 m), and deep (12 m) depths from a geotechnical boring and treated with both standard and enhanced stimulation solutions. Despite significant differences in stimulated urea degradation between soil depths and stimulation solution types, all tested columns achieved ureolysis rates sufficient to induce MICP, although at different times. Following 14 cementation treatments, soil columns achieved final values as high as and unconfined compressive strengths as high as 1.9 MPa. The results of this study suggest that native ureolytic microorganisms may be successfully stimulated in natural soil deposits to induce calcite precipitation at treatment depths up to 12 m for geotechnical ground improvement.
Design of in situ microbially induced calcite precipitation (MICP) strategies relies on a predictive capability. To date much of the mathematical modeling of MICP has focused on small‐scale experiments and/or one‐dimensional flow in porous media, and successful parameterizations of models in these settings may not pertain to larger scales or to nonuniform, transient flows. Our objective in this article is to report on modeling to test our ability to predict behavior of MICP under controlled conditions in a meter‐scale tank experiment with transient nonuniform transport in a natural soil, using independently determined parameters. Flow in the tank was controlled by three wells, via a complex cycle of injection/withdrawals followed by no‐flow intervals. Different injection solution recipes were used in sequence for transport characterization, biostimulation, cementation, and groundwater rinse phases of the 17 day experiment. Reaction kinetics were calibrated using separate column experiments designed with a similar sequence of phases. This allowed for a parsimonious modeling approach with zero fitting parameters for the tank experiment. These experiments and data were simulated using PHT3‐D, involving transient nonuniform flow, alternating low and high Damköhler reactive transport, and combined equilibrium and kinetically controlled biogeochemical reactions. The assumption that microbes mediating the reaction were exclusively sessile, and with constant activity, in conjunction with the foregoing treatment of the reaction network, provided for efficient and accurate modeling of the entire process leading to nonuniform calcite precipitation. This analysis suggests that under the biostimulation conditions applied here the assumption of steady state sessile biocatalyst suffices to describe the microbially mediated calcite precipitation.
1 October 2019 in Journal of Geotechnical and Geoenvironmental Engineering