Laboratory for Functional Polymers, EMPA Swiss Federal Laboratories for Materials Science and Technology 1 , Überlandstrasse 129, CH-8600 Dübendorf, Switzerland
Auto-generated profile, based on publicly available information
James Shaw-Stewart
Laboratory for Functional Polymers, EMPA Swiss Federal Laboratories for Materials Science and Technology 1 , Überlandstrasse 129, CH-8600 Dübendorf, Switzerland
An optimized laser-induced forward transfer (LIFT) technique has been used to fabricate tri-color organic light-emitting diode (OLED) pixels. At reduced pressures, and with a defined donor-receiver gap, patterned depositions of polyfluorene-based OLED pixels have been achieved. OLED pixel functionality has been demonstrated and compared with devices made using conventional deposition techniques. In addition, improved functionality has been obtained by coating the cathode with an electron-injecting layer, a process not possible using conventional OLED fabrication techniques. The OLED pixels fabricated by LIFT reach efficiencies on the range of conventionally fabricated devices and even surpass them in the case of blue pixels.
In this study we describe a simple method to fabricate microarrays of polystyrene microbeads (PS- ) on Thermanox coverslip surfaces using laser induced forward transfer (LIFT). A triazene polymer layer which acts as a dynamic release layer and propels the closely packed microspheres on the receiving substrate was used for this approach. The deposited features were characterized by optical microscopy, scanning electron microscopy, atomic force microscopy, and Raman spectroscopy. Ultrasonication was used to test the adherence of the transferred beads. In addition, the laser ejection of the PS- pixels was investigated by time resolved shadowgraphy. It was found that stable PS- micropatterns without any specific immobilization process could be realized by LIFT. These results highlight the increasing role of LIFT in the development of biomaterials, drug delivery, and tissue engineering.