This report presents exploration well data and interpretations relevant for mapping the variation in the depth to the base of ice-bearing permafrost (IBPF) for the Beaufort-Mackenzie Basin. This work is part of a larger government-industry funded petroleum systems study of the Beaufort-Mackenzie region that was active from 2001-2013. Geophysical well logs, well seismic surveys, shallow repeated temperature surveys, and deeper borehole temperature-depth profiles are utilized to determine the base of IBPF for 265 wells in the basin. Composite plots of log, seismic velocity and shallow temperature data illustrate typical geophysical responses and provide multi-parameter evidence for integrated interpretations of the IBPF zone. IBPF determinations are quality-assessed in terms of their reliability using a standardised scale based on the type of methods used and the quality of data available. For many of the wells, a sharp change in electrical and acoustic properties marks the base of the interpreted fully frozen IBPF zone which may represent the base of ice-bonded permafrost. For 135 wells, there is an underlying transition zone between 7 m to 210 m in thickness that is interpreted to represent partially-frozen IBPF. The interpreted co-existence of water and ice may be the result of changes in lithology, grain size, texture and/or pore water salinity which can affect the freezing point. There is a good correlation between the geophysically-determined base of IBPF and the depth to the base of permafrost from temperature surveys. This suggests that the mapped IBPF zone is a useful thermal boundary condition for thermal modelling and heat flow studies. For most of the wells, IBPF is confined to sandstones and conglomerates within Cenozoic sediments of the post-rift succession. Beneath the Beaufort Shelf, base of IBPF occurs within highly porous sediments of the Plio-Pleistocene Iperk Sequence. For central onshore areas (Richards Island and areas to south), base of IBPF occurs in progressively older, more deeply exhumed Cenozoic strata in a southward direction. Along the southeastern basin margin on Tuktoyaktuk Peninsula, IBPF extends into the Paleocene-Eocene Aklak Sequence. In the southernmost part of the basin and in the fold belt to the west, IBPF is encountered in Lower Cretaceous syn-rift and Upper Cretaceous post-rift strata. Permafrost occurs in exhumed Paleozoic strata in the Anderson Plain southwest of Tuktoyaktuk Peninsula. Depth to the base of IBPF varies from 0 m (no IBPF) to > 700 m across the study area. It is thinnest along the southern (landward) basin margin and in the deformed and exhumed western part of the basin, and is thickest in the rapidly deposited Cenozoic strata of the eastern shelf beneath the Beaufort Sea. IBPF may be absent over much of the modern delta area around Mackenzie Bay.
Age dispersion is a common feature of apatite fission track (AFT) and apatite (U–Th) He (AHe) thermochronological data, and it can be attributed to multiple factors. One underappreciated and underreported cause for dispersion is variability in apatite composition and its influence on thermal annealing of fission tracks. Using synthetic data we investigate how multikinetic AFT annealing behaviour, defined using the rmr0 parameter, can be exploited to recover more accurate, higher-resolution thermal histories than are possible using conventional interpretation and modelling approaches. Our forward model simulation spans a 2 Gyr time interval with two separate heating and cooling cycles and was used to generate synthetic AFT and AHe data for three different apatite populations with significantly different annealing kinetics. The synthetic data were then used as input for inverse modelling in the Bayesian QTQt software to recover thermal-history information under various scenarios. Results show that essential features of the dual peak thermal history are captured using the multikinetic AFT data alone, with or without imposed constraints. Best results are achieved when the multikinetic AFT data are combined with the AHe data and geologic constraint boxes are included. In contrast, a more conventional monokinetic interpretation that ignores multikinetic AFT behaviour reproduces all the input data but yields incorrect thermal-history solutions. Under these conditions, incorporation of constraints can be misleading and fail to improve model results. In general, a close fit between observed and modelled parameters is no guarantee of a robust thermal-history solution if data are incorrectly interpreted. For the case of overdispersed AFT data, it is strongly recommended that elemental data be acquired to investigate if multikinetic annealing is the cause of the AFT apparent age scatter. Elemental analyses can also be similarly useful for broadly assessing AHe data. A future companion paper (Issler et al., 2021) will explore multikinetic AFT methodology and application to detrital apatite samples from Yukon, Canada.