1 May 2024 in Journal of Ecological Engineering
The scientific article is devoted to the greening of technologies and its individual aspects, which is an important agricultural measure that can curb further decline in soil fertility, stabilize production systems, and reduce dependence on technological factors. Of the entire complex of...
1 March 2025 in Ecological Engineering & Environmental Technology
The conducted research is devoted to the selection of the optimal assortment for certain growing conditions and preparations for seed treatment before sowing during the growing season, which is one of the important tasks not only for increasing the level of yield and productivity elements, but...
23 March 2021 in Engineering, Energy, Transport AIC
Vibration mechanics and vibroreology play an important role in the new section of applied vibration theory formed in recent years - the theory of vibration processes and devices. This theory studies the patterns of excitation and vibration in different mechanical systems; it also includes the theory of machines in which vibration is used to achieve useful goals. Based on the considered models, it was possible to describe the chaotic motion of the bulk medium layer over the vibrating plane. Such movements, well known for liquids, have indeed been observed in the case of a bulk medium, which serves as another confirmation of the possibility of modeling slow motions of a bulk medium during vibration in the form of viscous fluid motions (of course, with the above caveats and additions). When studying the described simplest models, motion (including we are interested in slow motion) can be found by directly using the solution of the problem of vibrotransportation of the body (particles). The value of this approach is determined, however, by the possibility of its application for an approximate solution in more complex cases. In the study of slow motions of bodies interacting with both the forces of dry friction and collisions, these interactions can be modeled by the forces of viscous friction, taking into account the driving vibration force. This leads to the following vibroreological approach to modeling the behavior of the bulk medium in vibrating trays and vessels. Of all the considered models, the most promising is the model of the behavior of the bulk medium under the influence of vibration in the form of a viscous medium.The described models can be used when considering a practically important task of vibration penetration into a free medium.
22 April 2024 in Engineering, Energy, Transport AIC
The study examines technologies for inactivating anti-nutrients in soybeans, such as proteolytic enzyme inhibitors. In addition, soybeans have two trypsin inhibitors that bind cystine and methionine. Protease inhibitors include trypsin and chymotrypsin inhibitors, which are substances that are naturally present in soybeans to protect them from being eaten by birds and rodents and from the development of microflora. According to their heat resistance, antinutrients can be classified into heat-sensitive and heat-resistant. The purpose of the research was to study modern methods and technological solutions aimed at optimizing the preservation of useful characteristics of soybeans and reducing the content of anti-nutrients. To inactivate these anti-nutrients, physical, chemical and biological methods of legume processing are used. As a result of heat treatment, the nutritional value of beans increases, namely, the digestibility of proteins increases by up to 90%, and the contamination of beans with microflora is significantly reduced. The amount of trypsin inhibitor in soybeans after roasting with a roaster significantly decreased by 2.45 times, and lipoxygenase activity - by 2.71 times. One of the most attractive and highly effective, but not sufficiently researched methods is the method of heat treatment of legume seeds called micronization. In this case, the process of inactivation of anti-nutrients in soybeans is very fast - within 50...70 seconds, the nutritional value of protein is significantly increased, and the energy value increases (approximately from 7800 to 16000 kJ/kg). The technology of neutralization of anti-nutrients in soybeans based on their heat treatment in a 2.5 % solution of calcium hydroxide is considered. Processing of soybeans according to the developed technology allows to obtain feed without urease activity, and the content of trypsin inhibitor is at the level of 2-3 mg/g.
17 April 2026 in Vibrations in engineering and technology
The paper investigates the influence of the operating parameters of a vibratory mixer on the formation of feed mixture homogeneity and establishes quantitative patterns in the variation of the homogeneity coefficient depending on the kinematic and vibration characteristics of the process. The relevance of this study stems from the need to ensure high-quality feed mixtures with minimal time and energy expenditure, as the uniformity of the components directly affects feeding efficiency and the economic performance of livestock farming. The aim of the research is to establish a statistically justified multifactor dependence of the homogeneity coefficient on the operating parameters of a vibratory mixer and to determine rational operating modes. Experimental studies were carried out using a full factorial experimental design with variation of the paddle shaft rotational speed, container rotational speed, vibration mode coefficient, and mixing time. Based on the processing of experimental data, a second-order regression model describing the variation of the mixture homogeneity coefficient was developed. The statistical significance of the model parameters was evaluated using Student’s t-test, and its adequacy was verified using Fisher’s F-test at a confidence level of 0.95. According to the modeling results, rational operating modes of the mixer were determined, under which the homogeneity coefficient reaches δ = 0.932 at a paddle shaft rotational speed of 40.9 min-1 and a container rotational speed of 23.9 min-1. The minimum value of δ = 0.851 was observed at low values of the operating parameters. An effective operating region was established in which a technologically sufficient level of homogeneity (δ ≥ 0.9) is ensured. An analytical dependence of the mixing time t0.9 required to achieve a specified level of homogeneity was obtained, which makes it possible to predict process parameters and perform optimization. The correlation coefficient between experimental and calculated data is 0.87, confirming the adequacy of the developed mathematical model.
25 December 2025 in Vibrations in engineering and technology
The article presents the design and energy principles for developing an infrared (IR) micronizer intended for the thermal treatment of legume grains aimed at inactivating antinutritional compounds and improving feed nutritional quality. The use of medium-wave infrared radiation (λ = 2-4 μm) was found to provide uniform volumetric heating of the grain layer and reduce specific energy consumption by 30-40 % compared to conventional convective drying. A schematic design of the proposed micronizer includes a treatment chamber with polished reflectors, a block of quartz emitters, a mixing mechanism, a multilayer thermal insulation casing, and an automated temperature-control system. The optimal design and operating parameters were determined as follows: emitter power 1.0-1.5 kW, heat-flux density 15-25 kW/m2, distance from emitters to the grain layer 150 mm, and grain-layer thickness 15-20 mm. Experimental results demonstrated that heating at 140-160 °C for 70-90 s reduces urease activity by a factor of 8-10 while preserving 97-98 % of the crude protein content. The overall thermal efficiency of the unit reached 0.78-0.82, confirming its high energy performance. The use of polished aluminum reflectors decreased heat losses by 15-18 %, and PID-based power control maintained temperature stability within ±2 °C. The developed structural and energy solutions form a scientific and practical basis for creating next-generation industrial IR systems for feed processing, ensuring the safety, quality, and nutritional integrity of legume raw materials used in compound feed production.