Yurii Polievoda

Yurii Polievoda

Auto-generated profile, based on publicly available information

Yurii Polievoda

Vinnytsia National Agrarian University

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2025 in Vibrations in engineering and technology
Verified
Journal Article
Closed access
VGViktor Goots
Viktor Goots
OSOlena Solona
Olena Solona
YPYurii Polievoda
Yurii Polievoda
BSBohdan Symonik
Bohdan Symonik
The article examines the formation of food products, particularly meat-based ones, produced from structured raw materials. The quality of the forming process is of critical importance and depends on the physico-mechanical properties of the raw materials (viscosity, plasticity, adhesion) and the correct selection of technological parameters. Standardization plays a key role in this process, ensuring consistency in the requirements for raw material composition, equipment parameters, and production conditions. National (DSTU) and international (ISO) standards define the norms for the rheological characteristics of food masses, forming accuracy, sanitary requirements, and permissible thermal and mechanical loads. Adherence to these standards enables consistent product quality, safety, and efficiency in the production process. Further research into forming processes should be based not only on the physicochemical properties of the mass but also on the requirements of current standards regulating food production under industrial conditions. The article presents the results of theoretical and experimental studies on the compression mechanism of concentrated, comminuted food raw materials, taking into account the standardization requirements for product forming processes. To model the behavior of food masses, the Kelvin body rheological model was selected, which accounts for the viscoelastic properties of the systems. This approach allows the behavior of products during deformation to be formalized in accordance with the standard technological parameters outlined in regulatory documentation for meat products. The research results, demonstrating the relationship between deformation and the duration and conditions of loading, were presented graphically. For the first time, the mechanism of residual plastic deformation was scientifically substantiated, and a mathematical model was developed for its calculation, which enables its consideration in quality control systems in accordance with current standards. These approaches can be integrated into standardized methods for monitoring and optimizing forming processes in the food industry.

25 August 2023 in Engineering, Energy, Transport AIC
Verified
Journal Article
Closed access
GKGryhorii Kaletnik
Gryhorii Kaletnik
VYVitalii Yaropud
Vitalii Yaropud
YPYurii Polevoda
Yurii Polevoda
The process of removing moisture from vegetable agricultural raw materials is a diverse, but energy-consuming stage of production, regardless of the applied methods and methods of drying. For forecasting energy consumption and designing drying equ...

23 March 2021 in Engineering, Energy, Transport AIC
Verified
Journal Article
Closed access
YPYurii Polievoda
Yurii Polievoda
YVYevhenii Volynets
Yevhenii Volynets
Vibration mechanics and vibroreology play an important role in the new section of applied vibration theory formed in recent years - the theory of vibration processes and devices. This theory studies the patterns of excitation and vibration in different mechanical systems; it also includes the theory of machines in which vibration is used to achieve useful goals. Based on the considered models, it was possible to describe the chaotic motion of the bulk medium layer over the vibrating plane. Such movements, well known for liquids, have indeed been observed in the case of a bulk medium, which serves as another confirmation of the possibility of modeling slow motions of a bulk medium during vibration in the form of viscous fluid motions (of course, with the above caveats and additions). When studying the described simplest models, motion (including we are interested in slow motion) can be found by directly using the solution of the problem of vibrotransportation of the body (particles). The value of this approach is determined, however, by the possibility of its application for an approximate solution in more complex cases. In the study of slow motions of bodies interacting with both the forces of dry friction and collisions, these interactions can be modeled by the forces of viscous friction, taking into account the driving vibration force. This leads to the following vibroreological approach to modeling the behavior of the bulk medium in vibrating trays and vessels. Of all the considered models, the most promising is the model of the behavior of the bulk medium under the influence of vibration in the form of a viscous medium.The described models can be used when considering a practically important task of vibration penetration into a free medium.

24 December 2021 in Engineering, Energy, Transport AIC
Verified
Journal Article
Closed access
DBDmytro Borysiuk
Dmytro Borysiuk
VZViacheslav Zelinskyi
Viacheslav Zelinskyi
ITIgor Tverdokhlib
Igor Tverdokhlib
YPYurii Polievoda
Yurii Polievoda
Constructive improvement of mobile energy means, in particular their main unit - the internal combustion engine, is directed on: maintenance of differentiation of size of parameters of functioning of mechanisms of systems depending on variability of conditions and modes of operation of cars; increase of technical resource at use of cars on purpose in the set operating conditions. The existing methods and tools for diagnosing vehicle engines do not fully determine their current technical condition, which requires the development of mathematical models to automate the process of diagnosing their components and parts was found іn the analysis of literature sources. The object of diagnosis is a diesel internal combustion engine of the YaMZ-238 family, which is part of the power unit of most vehicles. Mathematical model of automation of the process of diagnosing internal combustion engines of the YaMZ-238 family is presents in the article. Replacing real technical devices with their idealized models allows the widespread use of various mathematical methods. In this case, the internal combustion engine of the YaMZ-238 family, as the object of diagnosis, is presented in the form of a «black box», the input and output parameters of which have a finite set of values. In general, the mathematical model is a system of functional relationships between each diagnostic signal and structural parameters. For internal combustion engines of the YaMZ-238 family, a diagnostic matrix has been compiled, which includes a list of faults and signs of faults. It is determined that the process of diagnosis based on the model of the diagnostic object is possible if the inverse transformation of the number of signs of malfunctions into the number of structural parameters (malfunctions) of the object was unambiguous. The proposed mathematical model of automation of the process of diagnosing internal combustion engines of the family YaMZ-238 will detect faults of components and parts depending on their characteristics.

24 December 2021 in Engineering, Energy, Transport AIC
Verified
Journal Article
Closed access
YPYurii Polievoda
Yurii Polievoda
SBSerhiy Burlaka
Serhiy Burlaka
Transport consumes about 20% of the world's primary energy, mainly oil. This situation is unacceptable for countries that do not have their own oil reserves and want a stable economy and energy independence. Communities in many countries recognize that these problems continue to accompany the use of road transport and have long paid serious attention to the use of alternative fuels for vehicles, including biofuels, natural gas and hydrogen. However, in the current increase in the number of food industry facilities, it is necessary to deal with food products that have a negative impact on the environment (food fats). According to some data, the amount of garbage per day can range from a few kilograms to tens of tons. Approximately 90% of diesel biofuels (DBs) are mainly derived from processed oils and raw materials, including fats and oils of animal or vegetable origin that are recyclable. Biofuel is a biologically harmless product. In contact with water, the wine does not harm aquatic flora and fauna. In water or soil, it undergoes almost complete biological decomposition. Combustion of diesel biofuels emits much less carbon dioxide (CO2) than combustion of conventional fuels. Of course, there are drawbacks. First, biofuels have low frost resistance. Undiluted biofuel damages rubber hoses and gaskets. Biofuels have a certain shelf life. Due to increased maintenance costs, deposits can contaminate fuel equipment and filters during operation. Particular attention should be paid to the free glycerin that remains during production. The article considers biofuel production technologies and methods of glycerin removal. The focus is on devices that allow you to remove glycerin mobile. As a result, a faucet was proposed in which a filter was installed to remove residual glycerin and a study of its operation using the FlowVision program was performed. The simulation model of operation of the mixer with reception of indicators of its work is executed.

30 August 2022 in Engineering, Energy, Transport AIC
Verified
Journal Article
Closed access
DBDmytro Borysiuk
Dmytro Borysiuk
VZViacheslav Zelinskyi
Viacheslav Zelinskyi
ITIgor Tverdokhlib
Igor Tverdokhlib
YPYurii Polievoda
Yurii Polievoda
To ensure the efficient operation of vehicles, first of all it is necessary to have continuous and safe operation of their units by improving the reliability and quality of diagnosis. The drive axle of the car is an important unit that is designed to transmit torque from the engine to the wheels of the vehicle. Transmission units must operate in all modes of operation of the vehicle. Loss of serviceability of the drive axle leads to loss of serviceability of the car as a whole. In this regard, the technical condition of this unit must be subject to increased requirements, and it is necessary to conduct systematic monitoring, which gives a clear idea of the current technical condition of the drive axle and the ability to predict the failure of this transmission unit. The existing methods and tools for diagnosing of driving truck axles do not fully determine their current technical condition, which requires the development of mathematical models to automate the process of diagnosing their components and parts was found іn the analysis of literature sources. Mathematical model of automation of the process of diagnosing of driving axles of KAMAZ cars is presents in the article. Replacing real technical devices with their idealized models allows the widespread use of various mathematical methods. In this case, the drive axle of the KamAZ cars, as the object of diagnosis, is presented in the form of a «black box», the input and output parameters of which have a finite set of values. In general, the mathematical model is a system of functional relationships between each diagnostic signal and structural parameters. For driving axles of KAMAZ cars, a diagnostic matrix has been compiled, which includes a list of faults and signs of faults. It is determined that the process of diagnosis based on the model of the diagnostic object is possible if the inverse transformation of the number of signs of malfunctions into the number of structural parameters (malfunctions) of the object was unambiguous. The proposed mathematical model of automation of the process of diagnosing of driving axles of KAMAZ cars will detect faults of components and parts depending on their characteristics.