1 January 2022 in Journal of Nanomaterials
Ferrochrome slag (FCS) and ferrochrome ash (FCA) are by‐products generated during the production of ferrochrome alloy in the ferrochrome industry. The use of these by‐products as construction materials appears to be an innovative strategy that could provide numerous environmental and socio‐economic benefits. However, the residual chromium present in ferrochrome by‐products may have some negative effects on the surrounding environment also. In a nutshell, this study provides a thorough and critical examination of ferrochrome slag and ferrochrome ash’s suitability for construction, as well as a list of the major shortcomings that must be addressed to accomplish construction sustainability. A detailed summary of the physical, chemical, and mechanical characteristics of ferrochrome slag and ferrochrome ash was presented in the study. Ferrochrome slag from previous studies is said to exhibit better mechanical properties compared to conventional coarse aggregates which contributed to better mechanical properties of concrete. The application of ferrochrome slag as a substitute for natural sand, on the other hand, is considered to have a detrimental impact. As a reason, further research is necessary to determine the impact of replacing conventional fine aggregate with ferrochrome slag on the various mechanical and durability properties of concrete. Ferrochrome ash from previous studies can be used as a partial replacement for cement and unlike FCS, FCA is nonhazardous since no residual chromium traces were present in FCA. Furthermore, the protracted safety and effect on the surrounding environment of ferrochrome slag containing concrete in a variety of exposure conditions have to be fully examined in the near future.
28 July 2022 in Journal of Building Pathology and Rehabilitation
17 October 2022 in International Journal of Pavement Research and Technology
24 January 2025 in Iranian Journal of Science and Technology, Transactions of Civil Engineering
1 January 2021 in IOP Conference Series: Materials Science and Engineering
The use of sustainable materials in construction is the need of the hour amidst the depletion of natural resources at a rapid rate. The significance of green roads is increasing day by day and green approach for road construction can be only achieved by the use of sustainable construction materials. In the present study, an effort has been made to make base and subbase courses sustainable using Reclaimed Asphalt Pavement (RAP) and Ground Granulated Blast Furnace Slag (GGBS) along with a very less quantity of cement. RAP used in the present study was obtained from the in situ milling of NH-16 at Srikakulam. To meet the gradation requirements as per IRC Ground Granulated Blast Furnace Slag (GGBS) was used along with RAP. Upon initial trial tests, it was concluded that unbound specimens made with RAP and GGBS have failed to meet the minimum unconfined compressive strength(UCS) requirements as per IRC: SP-89:2010 due to which cement by weight of 2% of total mix was added to meet the UCS requirement of 4.5 MPa at seven days. The optimum proportion of RAP that can be used to replace virgin aggregate (VA) was found to be 30% based on UCS test results. The durability studies of GGBS stabilized RAP/VA mixes were found to be satisfactory. The retained strength of the samples after durability studies is 91.43% which is greater than 80% as specified by IRC: SP-89:2010.
21 June 2025 in Innovative Infrastructure Solutions