Panneerselvam Arul Sivanantham

Panneerselvam Arul Sivanantham

Auto-generated profile, based on publicly available information

Panneerselvam Arul Sivanantham

Civil and Architectural Engineering Section, Department of Engineering, University of Technology and Applied Sciences, Muscat, Oman

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
BKBatna Anantha Venkata Ram Kumar
Batna Anantha Venkata Ram Kumar
LKLakshmi Keshav
Lakshmi Keshav
PSPanneerselvam Arul Sivanantham
Panneerselvam Arul Sivanantham
V.Vimal Arokiaraj .G
Vimal Arokiaraj .G
ZRZUNAITHUR RAHMAN
ZUNAITHUR RAHMAN
DSDasappa Somashekar
Dasappa Somashekar
Ferrochrome slag (FCS) and ferrochrome ash (FCA) are by‐products generated during the production of ferrochrome alloy in the ferrochrome industry. The use of these by‐products as construction materials appears to be an innovative strategy that could provide numerous environmental and socio‐economic benefits. However, the residual chromium present in ferrochrome by‐products may have some negative effects on the surrounding environment also. In a nutshell, this study provides a thorough and critical examination of ferrochrome slag and ferrochrome ash’s suitability for construction, as well as a list of the major shortcomings that must be addressed to accomplish construction sustainability. A detailed summary of the physical, chemical, and mechanical characteristics of ferrochrome slag and ferrochrome ash was presented in the study. Ferrochrome slag from previous studies is said to exhibit better mechanical properties compared to conventional coarse aggregates which contributed to better mechanical properties of concrete. The application of ferrochrome slag as a substitute for natural sand, on the other hand, is considered to have a detrimental impact. As a reason, further research is necessary to determine the impact of replacing conventional fine aggregate with ferrochrome slag on the various mechanical and durability properties of concrete. Ferrochrome ash from previous studies can be used as a partial replacement for cement and unlike FCS, FCA is nonhazardous since no residual chromium traces were present in FCA. Furthermore, the protracted safety and effect on the surrounding environment of ferrochrome slag containing concrete in a variety of exposure conditions have to be fully examined in the near future.

24 May 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
PSPanneerselvam Arul Sivanantham
Panneerselvam Arul Sivanantham
GPGanesh Prabhu
Ganesh Prabhu
V.Vimal Arokiaraj .G
Vimal Arokiaraj .G
KSK. Sunil
K. Sunil
This paper presents the findings of investigation, which was instigated to assess the effects of fibre aspect-ratio on the fresh and mechanical properties of SCC. The investigational parameters were aspect-ratio of the fibre and fibre addition rate. Two different aspect-ratios (64 and 73) of steel fibre were used and the fibre addition rate was between 0.2% and 1.0% with the increment of 0.2% and the fibres were added to the SCC in volume fraction. A series of tests were performed to determine the impact of fibre aspect-ratio and fibre inclusion rate on the engineering/mechanical properties of SCC. The presence of steel fibre in the SCC lessened the workability; furthermore, the upsurge in the inclusion rate of steel fibre abridged the workability further. The inclusion of fibre boosted the compressive strength of the SCC moderately, and conversely, an overwhelming increase in flexural and tensile strength was observed. The rise in the fibre aspect-ratio caused a 2.53% augmentation in the compressive strength of the SCC. Nevertheless, more than 11% improvement in tensile strength was observed, because of the bridging/anchorage established by the fibre. From the obtained results, it can be inferred that the impact of fibre aspect-ratio on the compressive strength of the SCC is not substantial; however, the tensile strength properties of the SCC can be enhanced moderately by increasing the fibre aspect-ratio.

12 July 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
PAPreetha Achuthan
Preetha Achuthan
GPGanesh Prabhu
Ganesh Prabhu
V.Vimal Arokiaraj .G
Vimal Arokiaraj .G
PSPanneerselvam Arul Sivanantham
Panneerselvam Arul Sivanantham
SSSubramanian Suthagar
Subramanian Suthagar
The impacts of three diameter/thickness (D/t) ratios (21.22, 25.46, and 31.83) and concrete strengths (40N/mm2, 50N/mm2, and 60N/mm2) on the strength capabilities of concrete-filled steel tubular (CFST) columns are investigated in this study. The central composite design (CCD) of the response surface methodology (RSM) was used to design the trials in order to complete the tests in a cost-effective manner. 13 (9 distinct tests) columns were evaluated according to the CCD experimental design, and the failure mode of the specimens, loaddeformation behavior, and ultimate strength capacity were investigated. Concrete strength improves, resulting in a decrease in steel tube confinement on the core. Because the steel tube longitudinal compressive stress (fsl) increases as the D/t ratio lowers, the confinement is reduced by inhibiting the circumferential tensile stress (fsc). The Reynolds stress models, analysis of variance (ANOVA), Pareto chart, and contour plot demonstrated that the column D/t ratio, rather than the in-filled concrete strength, has a considerable impact on the CFST columns strength capability. The proposed design models in different international codes and literature were evaluated for their effectiveness in predicting the strength capacities of CFST columns subjected to axial compression load. Using regression analysis, a simple design model was suggested to predict the axial strength capacities of CFST short columns, taking into account material strength and column shape. In comparison to other existing and suggested design models, the proposed design model of the present study delivers a more accurate and stable forecast.

1 June 2015 in International Journal of Engineering Research & Technology
Verified
Journal Article
Open access
PDF file
PAP Arulsivanantham
P Arulsivanantham
AUAMBO UNIVERSITY
AMBO UNIVERSITY
Download pdf article of Experimental Study on usage of Class-E Glass Fiber in the Cement Concrete written by Arulsivanantham