21 April 2021 in IEEE Antennas and Wireless Propagation Letters
A compact low-profile reconfigurable metasurface (MTS) antenna is presented in this letter, occupying an overall size of 0.65λ 0 × 0.65λ 0 × 0.067λ 0 . The proposed antenna is mainly composed of a 3 × 3 square MTS, a ring-shaped pixel structure, a square microstrip patch, a metal ground plane, and a simple feeding network. Through the characteristic mode analysis, two orthogonal degenerate modes are excited to realize the reconfigurable two linear polarizations and one circular polarization (CP). Furthermore, by loading an annular pixel structure around the MTS, the designed antenna can produce the steerable beam directions of ±40° with horizontal polarization, ±20° with vertical polarization, and ±25° with CP in the yz plane. Due to the symmetry of the layout, polarization and pattern diversities can also be realized in the xz plane. The proposed reconfigurable antenna is manufactured and measured to demonstrate the proposed design. The measured results show that the designed antenna acquires polarization and pattern diversities in C-band at the center frequency of 5 GHz, and the test results generally are in consistent with the simulation ones, which demonstrates the superiority of the proposed antenna.
31 January 2020 in IEEE Access
Reflectarray and transmitarray antennas have been widely used in radar detection systems and satellite communications. Simultaneous realization of reflection and transmission of electromagnetic waves under the same antenna aperture will undoubtedly save more space and cost, which is beneficial to their broader applications. In this paper, an antenna element based on active frequency selective surface (FSS) is proposed, which can realize band-pass and band-stop conversion by controlling the bias of the loaded PIN diode. Then, a reconfigurable antenna array including 9×9 elements and fed through a horn antenna is designed and demonstrated. Simulation and measurement results show that the designed antenna can realize the conversion of reflection and transmission at the frequency of 11 GHz, and the measured peak gain of reflection and transmission reaches 18.2 dBi and 20.9 dBi, respectively.
1 May 2017 in The Journal of the Acoustical Society of America
This study investigates the noise emitted by aircraft overflights. A multipole expansion method is used to model the noise source generated by propeller-driven aircrafts. Indeed, the multipole expansion method is frequently used in the study of electromagnetic wave propagation in which the far-field potential due to a localized charge distribution is approximated. This same technique is equally applicable in acoustics where the directivity of the aircraft noise source is modeled by summing a series of multipoles. For instance, the zero, first and second moment represent a monopole, dipole, and quadrupole, respectively. The first moment term is omni-directional and high order multipole terms have shown increasingly strong dependency on the receiver’s angular positions. The multipole expansion method leads to a more accurate model for evaluating the directivity effect due to aircraft flyovers. In the current study, precise (comprehensive) experimental data were used to determine the strength of each multipole term by means of non-linear least squares optimization. Our preliminary results have demonstrated that higher order multipoles up to and including quadrupole terms are needed to give reasonable predictions of the sound fields. [Work Sponsored by the Federal Aviation Administration.]