The current LANSCE LLRF system is an analog PI Feedback control system which achieves the amplitude and phase error within 1% and 1 degree. The feedback system receives the cavity amplitude and phase and the crosstalk between the amplitude and the phase paths is significant. We propose an In-phase (I) and Quadrature (Q) based feedback control system which easily decouples the crosstalk of I and Q channels. A gain scheduled PI feedback controller with optimally generated set point trajectory reduces the transient peak of the feedback controller and hence reduce the fatigue of the RF amplifier chain. An additional feature of the controller is the Neural network based self-tuning PI feedback, where the neural network tunes the feedback gains to minimize the errors in the least squares sense. The proposed control system is implemented with Altera Stratix II FPGA. The control system is modeled with DSP Builder and automatically generates HDL. Altera SOPC Builder is used for the hardware integration of the DSP Builder model, memories, peripherals, and 32 bit NIOS II embedded processor. NIOS II processor equipped with real time operating system communicates with the host computer via Ethernet, uploads data, computes parameters, and downloads parameters. The proposed control system is tested with the low power test-stand for the robustness of the algorithm.
The Spallation Neutron Source (SNS) is being designed for operation in 2004. The SNS is a 1 GeV machine consisting of a combination normal-conducting and super-conducting linac as well as a ring and target area. The linac front end is a 402.5 MHz RFQ being developed by Lawrence Berkeley Lab. The DTL (at 402.5 MHz) and the CCL (at 805 MHz) stages are being developed by Los Alamos National Laboratory. The expected output energy of the DTL is 87 MeV and that of the CCL is 185 MeV. The RF control system under development for the linac is based on the Low Energy Demonstration Accelerator (LEDA) control system with some new features. This paper will discuss the new design approach and its benefits. Block diagrams and circuit specifics will be addressed. The normal conducting RF control system will be described in detail with references to the super-conducting control system where appropriate.