17 December 2025 in IEEE Sensors Journal
Printed Circuit Board (PCB) thermal monitoring has emerged as necessity for many modern systems, since elevated temperatures can lead to failures. Meanwhile, Infrared (IR) thermography and alternative solutions are impractical for integration with the final product. In this article, a methodology for implementing a planar, copper Resistance Temperature Detector (RTD) array, based on rigid, FR-4 PCB technology, is proposed. The array is utilized to reconstruct in situ thermal maps of a PCB. The proposed 3mm× 3mm sensor (one of the smallest compared to literature) is realized as a serpentine-shaped PCB trace. The onboard measurement circuit is based on a four-wire ratiometric topology, which offers increased accuracy. A high-resolution Analog to Digital Converter (ADC) is employed to measure the resistance of the sensors and analog multiplexers select the sensor to be sampled. The array consists of 64 sensors placed on a hexagonal grid and the complete system occupies 21% of the 150mm× 100mm PCB area. Sensor characterization demonstrates high linearity (R2 > 0.9999) and low fit errors (0.12 °C Root Mean Square Error (RMSE)). The resolution of the measurement system is below 0.04 °C at 84.4 °C. A geometry-aware algorithm is developed for reconstructing thermal maps, exhibiting 16% improvement over simple interpolation methods. The experimental results are in agreement with a thermal camera (RMSE as low as 2.8 °C) and the system achieved transient step response rates up to 12.3 °C/s, proving its ability to reconstruct accurate thermal maps.