12 April 2021 in Applied Physics Letters
In MoS2 field-effect transistors, the current or voltage fluctuations related to either mobility- or number-dependent relationships are characterized by low-frequency noise. This noise can typically be used to evaluate the application limits of MoS2-based electronic devices. In this work, the low-frequency noise characteristics of single-crystal bilayer MoS2 grown by chemical vapor deposition (CVD) are systematically investigated and found to offer significant performance improvements compared with those based on the monolayer MoS2 channel. At f = 100 Hz, the normalized drain current power spectral density (SI/Id2) is 2.4 × 10−10 Hz−1 and 3.1 × 10−9 Hz−1 for bilayer and monolayer MoS2 transistors, respectively. The 1/f noise behavior can be accurately described by McWhorter's carrier number fluctuation model for both transistor types, suggesting that carrier trapping and de-trapping by dielectric defects is the dominant mechanism of 1/f noise in CVD MoS2 transistors. Furthermore, a minimal WLSI/Id2 of 3.1 × 10−10 μm2/Hz (where W is the gate width and L is the gate length) is achieved at Vbg = 3 V by effectively reducing the contact resistance of bilayer MoS2 transistors using a back-gate voltage. These results demonstrate that CVD bilayer MoS2 is a promising candidate for future large-scale 2D-semiconductor-based electronic applications with improved noise performance.
10 December 2025 in Optics Communications
8 May 2024 in Optics & Laser Technology
8 September 2025 in Applied Physics Letters
Thin-film transistors with a source barrier—such as source-gated transistors and tunneling contact transistors—exhibit ultrahigh intrinsic gain (Ai) and low power consumption, making them promising candidates for low-power circuits and wearable devices. However, their low output saturation current (Idsat) remains a significant challenge. In this work, tunneling contact thin-film transistors (TC-TFTs) with a high-mobility indium tin oxide (InSnO) channel were fabricated, and the effect of oxygen partial pressure on their performance was systematically investigated. Compared to conventional InSnO transistors, InSnO TC-TFTs demonstrated a significant increase in intrinsic gain and a reduction in power consumption. Furthermore, by adjusting the oxygen partial pressure during the sputtering of InSnO, the output current of the TC-TFTs was improved to a level comparable to that of conventional InSnO transistors. X-ray photoelectron spectroscopy analysis revealed that the output current's dependence on oxygen partial pressure is attributable to variations in Schottky barrier height, which are induced by changes in carrier concentration. These results demonstrate the potential for fabricating high-performance InSnO TC-TFTs that combine large saturation current, high intrinsic gain, and low power consumption.