1 February 2020 in Materials Research Express
17 June 2023 in Journal of Engineering Research
VPVenkateswara Babu Peddakondigalla
Venkateswara Babu Peddakondigalla
1 September 2019 in Materials Research Express
3 January 2023 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
PPPhani Prasanthi Parvathaneni
Phani Prasanthi Parvathaneni
+3
A five-layered aluminum–copper metal functionally graded material was developed through powder metallurgy process. The sample comprises different weight percentages of copper and aluminum that vary from 0 wt% to 100 wt % along the thickness direction. Erosion wear was performed on air jet erosion testing apparatus at a constant impact angle of 90 o and impact velocity of 151 m/s. It was observed that erosion wear decreases when there is an increase in copper content. Layer 1 comprising 100 wt% of copper has shown 76.92% lower wear compared to layer 5 (100 wt% of aluminum). Besides, erosion resistance was enhanced at graded layers due to the formation of Al 2 Cu phase during sintering. Abrasive wear of metal functionally graded material was evaluated on the pin-on-disc test apparatus. Experiments were conducted at different loading conditions on various abrasive surfaces (P120, P800, and P2000). Irrespective of abrasive surface, the specific wear rate of aluminum–copper metal functionally graded material sample increased with an increase in load from 5N to 15N. At 5N, abrasive wear of metal functionally graded material on P2000 grit surface was 87.7% and 27.19% lower compared to P120 and P800, respectively. Eroded and worn-out surfaces were examined microscopically to understand the wear mechanisms and are discussed in detail.
1 April 2021 in IOP Conference Series: Materials Science and Engineering
It is proved that the optimal design of surface textures (positive or negative) improve the lubrication performance by generating extra hydrodynamic pressure at the interface of the sliding pairs. In the present work, the effect of various positive surface textures on hydrodynamic performance of parallel sliding contact under mixed lubrication is researched. The modified Reynolds equation and asperity contact model are solved simultaneously to assess the hydrodynamic pressure and minimum film thickness for different shape of textures. The results depict that elliptical shaped texture generate high hydrodynamic pressure as well as minimum film thickness at the conjunction than the other texture shapes.