Natalya F. Naumenko

Natalya F. Naumenko

Auto-generated profile, based on publicly available information

Natalya F. Naumenko

Acousto-Optical Research Center, National University of Science and Technology MISIS, Moscow, Russia

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

6 April 2020 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Verified
Journal Article
Closed access
NNNatalya F. Naumenko
Natalya F. Naumenko
A layered structure combining a thin plate of lithium niobate (LN) with a langasite (LGS) substrate was numerically investigated as an advanced substrate material for surface acoustic wave (SAW) devices with improved characteristics, including capability of operating at high temperatures. The longitudinal leaky SAWs (LLSAWs) propagating with negligible attenuation and high velocities up to 6400 m/s were found in LN/LGS using an optimization technique previously applied to LN/quartz structure. Compared to quartz, the use of LGS as a substrate imposes less constrains on bonding at elevated temperatures for fabrication of a layered structure. Due to the specific acoustic anisotropy of LGS crystals, low-attenuated high velocity waves exist in a wide range of LGS orientations, including the commercially available SAW cut, when LGS substrate is combined with LN plate. In the found optimal structures, the electromechanical coupling grew from 5.5% to 14.5%, with increasing LN thickness, making LN/LGS substrate suitable for application in SAW devices with a widely varying bandwidth. In addition, low shear bulk wave velocities in LGS provide a wide spurious-free frequency range in resonators utilizing LLSAW.


10 March 2023 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Verified
Journal Article
Closed access
NNNatalya F. Naumenko
Natalya F. Naumenko
Laterally excited bulk acoustic resonators (XBARs) are plate mode resonators in which one of the higher-order plate modes transforms into the bulk acoustic wave (BAW) due to the very thin plates used in these devices. The propagation of the primary mode is usually accompanied by numerous spurious modes, which deteriorate resonator performances and restrict potential XBARs’ applications. This article suggests a combination of different methods for insight into the nature of the spurious modes and their suppression. Analysis of the BAW slowness surface provides optimization of XBARs for single-mode performance in the filter passband and around it. The rigorous simulation of admittance functions in the optimal structures allows for further optimization of electrode thickness and duty factor. Finally, the nature of different plate modes generated in a wide frequency range is clarified via simulation of dispersion curves, which characterize acoustic mode propagation in a thin plate under the periodic metal grating, and visualization of displacements accompanying wave propagation. Application of this analysis to lithium niobate (LN)-based XBARs demonstrated that in LN cuts with Euler angles (0°, 4°–15°, 90°) and plate thickness dependent on orientation and varying between 0.05 and 0.1 wavelengths, the spurious-free response could be achieved. Due to tangential velocities of 18–37 km/s combined with the coupling of 15%–17% and feasible duty factor ${a}/{p}$ = 0.5, the found XBAR structures can be applied in high-performance 3–6 GHz filters.

15 June 2021 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Verified
Journal Article
Closed access
NNNatalya F. Naumenko
Natalya F. Naumenko
LiNbO 3 (LN) or LiTaO 3 (LT) thin plates bonded to quartz are novel types of layered substrates for temperature-compensated surface acoustic wave (TCSAW) devices. In SAW resonators with Al electrodes arranged on LT/quartz and LN/quartz substrates, improved temperature behavior due to opposite signs of temperature coefficients of frequency (TCF) in quartz substrates and LT or LN plates can be combined with high ${Q}$ -factors if the quartz orientation is optimized. The quartz orientation areas that enabled high ${Q}$ -factors were deduced from analyzing the quartz anisotropy and the characteristics of shear horizontally (SH) polarized waves were calculated in the optimal orientations as functions of the quartz cut angle and plate thickness. The simulation results illustrated by contour plots of the wave characteristics revealed the presence of zero lines on the plots demonstrating TCFs at resonant (TCF R ) and antiresonant (TCF A ) frequencies in both layered structures. The strong quartz anisotropy explained anomalous temperature behavior of SAW resonators and the existence of LT/quartz structures with TCF A = TCF R facilitating the design of SAW devices with improved thermal stability in the passband. In the LT/quartz structures, two TCFs vanished simultaneously at certain plate thickness and quartz orientation, while in the LN/quartz zero lines did not intersect but low TCF = −(10–20) ppm/°C combined with electromechanical coupling exceeding 18% were obtained numerically in some structures. The effect of inverting the propagation direction or cut angle in one of the combined materials on the wave characteristics was discussed and numerically estimated.

14 August 2017 in Applied Physics Letters
Verified
Journal Article
Closed access
NNNatalya Naumenko
Natalya Naumenko
Pascal NicolayPascal Nicolay
Pascal Nicolay
There is a need for wireless sensors able to operate in the intermediate temperature range (ITR) between 300 °C and 600 °C. Surface acoustic wave (SAW) sensors are promising candidates to solve this issue. However, existing SAW sensors most often fail in the ITR, due to the quick degradation of the sensor housing in extreme conditions. A promising way to circumvent the issue is to use “package-less” devices, where the acoustic waves are guided in a multilayered structure where they are intrinsically protected from adverse environmental effects. We present here an innovative multilayered structure that fulfills all the basic requirements, to achieve a wireless and “package-less” SAW Sensor for the ITR. The structure is made of a thin AlN layer deposited on top of a Y + 128°LN substrate and equipped with buried Pt electrodes. Numerical simulations of the acoustic waves propagating in SAW resonators built on this structure reveal the existence of a useful Rayleigh-type SAW that propagates at the AlN/LN interface with a velocity up to 4500 m/s and a high electromechanical coupling k2=5.6%, without leakage into the substrate. The existence of this mode is due to specific properties of the Y + 128°LN cut, which are analyzed in detail in this paper. The performances of an optimized AlN/Pt/LN structure are also compared to the ones of previously suggested “package-less” structures, including AlN/ZnO/Sapphire. It is shown that better device characteristics can be expected from the AlN/Pt/LN structure in the ITR.