7 May 2025 in Proceedings of the National Academy of Sciences of Belarus. Agrarian Series
To speed up the olive harvesting process, a tractor-driven olive harvesting machine was designed and manufactured at the Institute of Agricultural Engineering (AEI), Islamabad. This newly developed equipment was tested on the Bari Zaitoon-I cultivar for its performance evaluation. This innovative technology has proven valuable in efficiently replacing expensive manual harvesting operations with timely and economic alternative. It was experimentally evaluated at different PTO speeds, stroke lengths (SL), and vertical clamp positions (CP) on the tree to find the harvested and leftover fruit (%) and field capacity (trees/h) of the machine. Data collected was statistically analyzed by using “Statistix 8.1” software at a 5 % le vel of probability. The best results were recorded as 92.4 % harvested fruit, 7.6 % leftover fruit and 23.6 trees/h field capacity at the PTO speed of 300 rpm along with the stroke length of 10 cm and clamp position of 1 m on the tree trunk from the ground. The use of the developed equipment will make it possible to harvest olives in a shorter time than with manual harves ting without reducing the quality and weight of the obtained products.
31 January 2026 in Proceedings of the National Academy of Sciences of Belarus. Agrarian Series
This study was conducted to evaluate the feasibility of optimizing a series-type air distribution system in pneumatic planter transforming uniform seed placement through efficient vacuum pressure with the blower rotation for the planting of maize crop. A laboratory-based experimental facility was designed to test the performance of the pneumatic planter under four blower speeds (600, 900, 1 200, and 1 500 rpm) and three seed metering (SM) disc rotational speeds (17, 22, and 28 rpm). The most critical performance parameters were the vacuum pressure, the velocity losses of air, and the uniformity of seed-drop. To determine the effect of the blower rotation the on vacuum pressure, the vacuum pressure was observed at different locations in the air distribution system. The experimental results were confirmed with ANSYS simulation modeling the dynamics of airflow and pressure distribution in the series air channel-type. The physical tests and the simulation tests done to determine the behaviour of the seeds in the airflow (vacuum pressure) and accurate delivery of the seeds. The findings revealed that revolution of blowers and rotation of the disc created a statistically significant difference ( p < 0.05) in a vacuum pressure and seed distribution uniformity. The minimum optimal range of vacuum was –4.2 to –3.9 kPa that was created at 1 500 rotations of blower per minute (BR 4 ) and 22 rpm disc equivalence and the vacuum range was efficient on seed pick up and vortex seed loss. On the other hand, when the speeds of the blower were low (600–1 200 rpm) the vacuum pressure was weak (–0.24 to –2.28 kPa), with which the placement of the seeds was erratic. Even though BR 4 showed better performance, it also had the negative impact of increasing power requirement and fuel usage due to the heavy demand of the PTO on the tractor. The series type pressure distribution geometry optimized the performance of the pneumatic seed planter in terms of seed placement at BR 4 and disc speed of 22 rpm. Despite the enhanced reliability of operations when there is increased speed of blowers, careful thought should be put on energy efficiency.