16 February 2018 in Journal of Mechanical Science and Technology
1 January 2018 in Biomedical Signal Processing and Control
21 August 2019 in Journal of Neural Engineering
Objective . Since noise is inevitably introduced during the measurement process of surface electromyographic (sEMG) signals, two novel methods for denoising based on the variational mode decomposition (VMD) method were proposed in this work. Prior to this study, there has been no literature relating to how VMD is applied to sEMG denoising. Approach . The first proposed method uses the VMD method to decompose the signal into multiple variational mode functions (VMFs), each of which has its own center frequency and narrow band, and then the wavelet soft thresholding (WST) method is applied to each VMF. This method is termed the VMD-WST. The second proposed method uses the VMD method to decompose the signal into multiple VMFs, and then the soft interval thresholding (SIT) method is performed on each VMF, which is abbreviated as VMD-SIT. Ten healthy subjects and ten stroke patients participated in the experiment, and the sEMG signals of bicep brachii were measured and analyzed. In this paper, three methods are used for quantitative evaluation of the filtering performance: the signal-to-noise ratio (SNR), root mean square error and R -squared value. The proposed two methods (VMD-WST, VMD-SIT) are compared with the empirical mode decomposition (EMD) method and the wavelet method. Main results . The experimental results showed that the VMD-WST and VMD-SIT methods can effectively filter the noise effect, and the denoising effects were better than the EMD method and the wavelet method. The VMD-SIT method has the best performance. Significance . This study provides a new means of eliminating the noise of sEMG signals based on the VMD method, and it can be applied in the fields of limb movement classification, disease diagnosis, human-machine interaction and so on.
14 January 2019 in IEEE Access
The method to estimate joint motion quickly and accurately from surface electromyogram (sEMG) has been explored by many researchers. However, the effect of different grabbing loads is ignored by most of them, which limits its clinical and daily applicability. In order to eliminate this effect in the course of motion estimation, an Adaboost-AF method based on Adaboost regression was proposed to identify the load information and estimate motion intention. This method is composed of three parts: the sEMG preprocessing part, the load identification part, and the motion intention estimation part. The average value of sEMG feature signal, which is obtained during sEMG preprocessing part, was used to identify the load information. Five features, root mean square (RMS), waveform length (WL), difference absolute standard deviation value (DASDV), integral signal of sEMG (IEMG), low-pass filtered signal of sEMG (LPFEMG) similar to sEMG envelope were explored whether the average value of features signal can be used to identify the load under different speed. After the load was identified, the Adaboost regression framework with the Decision tree as the weak learner was applied to be the motion intention estimation part. Experimental results showed that the average root-mean-square difference (RMSD) between actual angle and estimated angle by using the Adaboost-AF method was 0.1193±0.0148, and the average execution time for a section of data with 17.58 seconds was 0.3932±0.0610 second (Scikit-learn packet was adopted, and the version number was V0.21. The running software was Spyder, Python3.6). This work shows that the method based on the average value of sEMG feature signals can eliminate the influence of different loads without adding new sensors; IEMG and LPFEMG from the biceps brachii muscle show the optimal loads identification performance; the proposed Adaboost-AF method takes the influence of different loads into account and ensures the rapid and accurate estimation performance of motion intention.
23 July 2020 in Journal of Neural Engineering
Objective: Human intention gesture recognition is widely used in hand rehabilitation, artificial limb control, teleoperation, human-computer interaction and other fields. It has great application value, however, how to extract human intention gesture accurately has been a research hotspot. Approach: Inspired by the image processing technology of machine vision, the surface electromyographic (sEMG) signal was selected as the source signal of motion intention in this work, and the original sEMG signal was converted into Gramian Angular Summation/Difference Field (GASF/GADF) image. Then, Histogram of Oriented Gradient (HOG) features of the corresponding GADF and GASF image were extracted. The extracted features are named as GASF-HOG and GADF-HOG. The Bagging method was used to map the features to six common gestures to realize the classification of intention gestures. Ten volunteers participated in the experiment, and the experimental data were used to verify the proposed method. Main results: The experimental results showed that the average accuracies of the proposed methods (GADF-HOG with Bagging, GASF-HOG with Bagging) were as follow: GADF-HOG with Bagging was with 95.73 ± 1.90%, and GASF-HOG with Bagging was with 93.63 ± 1.54%. Significance: The method proposed in this paper is inspired by image processing technology of machine vision, which provides a new idea about the human intention gesture recognition by combining the interdisciplinary knowledge.