Dynamic spectrum access (DSA) has seen a growing interest in recent years due to spectrum scarcity. Cognitive radio is a necessary component to enable DSA. One key requirement for cognitive radio is the ability to blindly detect the presence of signals in time and frequency. One popular method for blind detection is computing a power spectral density estimate using the Welch periodogram. The Welch periodogram is optimally efficient under the assumption that received signals are in the presence of additive white Gaussian noise. However, the Welch periodogram is not robust against non-Gaussian noise. Robustness against non-Gaussian noise is desirable because many man-made devices - such as microwave ovens, WiFi co-channel, gas emissions, etc. - contaminate the spectrum with non-Gaussian noise. In this work, robust estimation techniques are applied to the Welch method to increase its robustness against non-Gaussian noise at the cost of estimation efficiency and computational ease. The increase in robustness of the modified Welch method (compared to the traditional Welch method) is demonstrated for the Middleton Class A non-Gaussian noise model. These robust techniques are shown to enable more reliable detection of signals contaminated by non-Gaussian noise.
This work presents an approach for performing automatic modulation classification (AMC) in a distributed environment using a novel multi-input averaging Convolutional Neural Network (CNN) which ingests one instance of raw received data, in Inphase/Quadrature (IQ) format, and compressed realizations of the same signal from neighboring nodes. Further, this work examines the use of undercomplete autoencoders (AEs) as a means to compress raw received IQ data for transmission to neighboring nodes while retaining the signal features most pertinent to performing AMC. The accuracy of the developed approach is evaluated using simulated BPSK, QPSK, and 16QAM signals, with a noise-only class, and the impact of the compression ratio, number of nodes, and SNR are considered. While results show that the implemented AE is not an effective means of compressing raw IQ data, results did show that by combining data realizations from neighboring nodes using the proposed approach, classification accuracy increases by as much as 7% per node.
Waveguide based Bragg grating devices have the potential of integration with passive or active optical components. A narrow bandwidth Bragg reflection filter or Fabry-Perot resonant structures can be realised using the approach of periodic refractive index modulation in waveguide gratings to form reflective structures. Most authors have considered 1st order Bragg gratings with periods of the order of 228nm operating at 1550nm but at the expense of complexity and high cost of fabrication. This paper describes the design of Silicon-On-Insulator (SOI) rib waveguides operating in the single mode regime that exhibit low polarisation dependence. A rigorous leaky mode propagation method (LMP) has been used to investigate the influence of etch depth in 3rd order Bragg gratings on the reflectance and bandwidth in the waveguides.
In wireless communications, collaborative spectrum sensing is a process that leverages radio frequency (RF) data from multiple RF sensors to make more informed decisions and lower the overall risk of failure in distributed settings. However, most research in collaborative sensing focuses on homogeneous systems using identical sensors, which would not be the case in a real world wireless setting. Instead, due to differences in physical location, each RF sensor would see different versions of signals propagating in the environment, establishing the need for heterogeneous collaborative spectrum sensing. Hence, this paper explores the implementation of collaborative spectrum sensing across heterogeneous sensors, with sensor fusion occurring in the cloud for optimal decision making. We investigate three different machine learning-based fusion methods and test the fused model's ability to perform modulation classification, with a primary goal of optimizing for network bandwidth in regard to next-generation network applications. Our analysis demonstrates that our fusion process is able to optimize the number of features extracted from the heterogeneous sensors according to their varying performance limitations, simulating adverse conditions in a real-world wireless setting.
Impulse ultra wideband (UWB) communications promises a number of potential benefits for use in wireless sensor networks-particularly in forest environments where it can provide robust operation along with the ability to combine communications with precision position location. Additionally, MIMO communications for UWB provides the ability to take advantage of the rich multipath diversity inherent to UWB communications in order to provide enhanced robustness to fading as well as improved coverage in non line-of-sight scenarios. In this paper, we present a detailed analysis of the spatial correlation of UWB signals in a forest environment. Propagation measurements were performed using a 620 picosecond duration UWB pulse in four different forest environments: light brush, light, medium, and dense forest at distances of up to 50 meters. The mean spatial correlation was observed to vary based on forest environment, antenna type, antenna array orientation, and transmitter-receiver separation distance. These measurement results should aid in the development of MIMO algorithms for UWB outdoor communications.