25 January 2018 in Green Chemistry
The valorization of vegetable waste can create opportunities to produce new valuable bioplastics. In this study, a one-step process to fully convert a variety of vegetable waste materials into bioplastic films is reported. The process is carried out in a diluted aqueous HCl solution at room temperature, it is easily scalable, and with no environmental concerns associated with the use of organic or dangerous chemicals. The generated bioplastics are completely biodegradable and environmentally friendly. Freestanding, flexible bioplastic films were obtained from vegetable waste like carrot, parsley, radicchio and cauliflower. They have similar mechanical properties with other bioplastics, like thermoplastic starch, and showed to have little migration in a food simulant. The color and the functional properties (i.e. antioxidant capability) of the starting vegetables are preserved in the bioplastics, thanks to the mild conditions of the fabrication process. The new conversion process allows the blending of the bioplastics with other natural or synthetic polymers, in order to improve their mechanical and gas barrier properties, like the oxygen permability (OP), thus expanding their field of applications. Poly vinyl alcohol (PVA)/carrot bioplastic film showed an OP of 31.2 cm3 μm m−2 day−1 kPa−1, which is lower than the OP for other synthetic films, like high density polyethylene films (HDPE), and similar to edible materials like chitosan.
28 May 2022 in Green Chemistry
AQAna Isabel Quilez-Molina
Circular economy approach for various agrowaste-based bioplastic and biocomposite systems with potential applications in the protection of food products and extension of their shelf life.
9 September 2021 in ACS Applied Polymer Materials
Polylactic acid (PLA) is a key biopolymer with potential uses in numerous sectors, since it is biocompatible and both biobased and biodegradable. However, brittleness limits its industrial applications where plastic deformation at high impact rates or high elongation is required, for instance, flexible food packaging. In order to overcome this drawback and potentially expand the PLA market, we developed flexible PLA materials plasticized with renewable and biodegradable epoxidized soybean oil methyl ester reaching elongations at break of almost 800%. The use of amorphous PLA in combination with the lubricating effect of the plasticizer allowed the more sustainable extrusion at a low temperature of 140 °C, preventing the degradation of PLA and at the same time saving energy. Moreover, plasticized films produced, upon handling, significantly less acoustic noise than pure PLA, which is of great importance for food packaging applications. Morphology, thermomechanical and barrier properties, and migration levels were evaluated as a function of plasticizer content.
1 June 2018 in Acta Biomaterialia
MMMaddalena Mastrogiacomo
Human platelet lysate (hPL) is a pool of growth factors and cytokines able to induce regeneration of different tissues. Despite its good potentiality as therapeutic tool for regenerative medicine applications, hPL has been only moderately exploited in this field. A more widespread adoption has been limited because of its rapid degradation at room temperature that decreases its functionality. Another limiting factor for its extensive use is the difficulty of handling the hPL gels. In this work, silk fibroin-based patches were developed to address several points: improving the handling of hPL, enabling their delivery in a controlled manner and facilitating their storage by creating a device ready to use with expanded shelf life. Patches of fibroin loaded with hPL were synthesized by electrospinning to take advantage of the fibrous morphology. The release kinetics of the material was characterized and tuned through the control of fibroin crystallinity. Cell viability assays, performed with primary human dermal fibroblasts, demonstrated that fibroin is able to preserve the hPL biological activity and prolong its shelf-life. The strategy of storing and preserving small active molecules within a naturally-derived, protein-based fibrous scaffold was successfully implemented, leading to the design of a biocompatible device, which can potentially simplify the storage and the application of the hPL on a human patient, undergoing medical procedures such as surgery and wound care. Human platelets lysate (hPL) is a mixture of growth factors and cytokines able to induce the regeneration of damaged tissues. This study aims at enclosing hPL in a silk fibroin electrospun matrix to expand its utilization. Silk fibroin showed the ability to preserve the hPL activity at temperature up to 60 °C and the manipulation of fibroin's crystallinity provided a tool to modulate the hPL release kinetic. This entails the possibility to fabricate the hPL silk fibroin patches in advance and store them, resulting in an easy and fast accessibility and an expanded use of hPL for wound healing.
7 July 2021 in Green Chemistry
The development of mulch films from wastes of vegetables represents a sustainable alternative to the traditionally used polyethylene ones that follow the principles of circular economy. In this work, we obtained films based on two different industrial vegetable wastes, orange peels (OP) and spinach stems (SS), using hydrolysis at different times (6, 16, and 24 h) and temperatures (30, 50, and 70 °C). Hydrolysis carried out at 30 °C and 24 h has led to films with the best mechanical properties, while high temperatures (70 °C) combined with prolonged treatment times (16 and 24 h) led to materials with lower mechanical resistance and darker coloration. The films’ characterization by X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), and uniaxial tensile tests elucidated their chemical structure and physicochemical properties. Additionally, the materials’ interaction with water was evaluated and significantly improved by adding a carnauba wax coating. Optical properties, micro and macronutrient content and biodegradation in the soil of selected bioplastics were also determined. Results showed that the proposed materials present fast in-soil biodegradation, good potentiality for weed prevention and improvement of plant growth via soil fertilization.
11 January 2021 in Nanomedicine
Aim: To realize and characterize a new generation of keratin-coated gold nanoparticles (Ker-AuNPs) as highly efficient photosensitive nanosized therapeutics for plasmonic photothermal (PPT) therapy... Graphical abstract Lay abstract This work involves the synthesis and application of nanosized keratin-coated gold particles; a protein extracted from wool. Their effect against a specific type of brain cancer, gliobl...