10 July 2026 in International Journal of Pavement Engineering
1. Thermal cracking is one of the major distresses for asphalt concrete (AC) pavements in regions with colder climates and higher cooling rates (Clopotel et al., 2012). The pavement tends to contra...
26 March 2026 in Journal of the American Ceramic Society
In this work, failure of a magnesium aluminate spinel (MgAl 2 O 4 ) is investigated at the microscale by concurrent in situ imaging and loading within a transmission electron microscope. The goal of the effort is to quantitively measure the grain boundary fracture toughness of a spinel bi‐crystal and study the toughness property disparity between the grain boundary and lattice (measured in an earlier effort). Additionally, the mode mixity dependence of the grain boundary fracture properties is measured as the applied loading configuration is varied. By placing a notch aligned with the grain boundary at the top or bottom edge of a bi‐crystal beam sample, bending experiments can generate grain boundary failure with different mode mixites. Critical energy release rates and mode mixity indicators for each sample were extracted through three‐dimensional finite element analysis (FEA), validated by comparison of particle tracking measurements with the FEA results. For opening‐dominated fracture, the grain boundary exhibited a lower fracture energy when compared to the single crystal lattice. Alternatively, shear‐dominated modes exhibit much larger toughness.
14 November 2026 in Journal of Transportation Engineering, Part B: Pavements
Low-temperature cracking is a prevalent distress in airfield asphalt concrete (AC) pavements, yet the Federal Aviation Administration’s current mix design method does not specify a test to assess the low-temperature cracking potential of AC. To bridge this gap, current efforts to adopt a balanced mix design (BMD) framework are examining low-temperature tests for routine specification. This study assessed the simplified low-temperature semicircular bend (SLT-SCB) test for airfield BMD applications by quantifying its sensitivity to key material and production variables. This study incorporated seven airfield mixtures and four binder cross-combinations for evaluating their effects on the newly proposed low-temperature cracking index (LCI). The effect of air-void levels and aging was studied for lab-mix lab-compacted (LMLC) specimens. Cross-combination lab-mix lab-compacted specimens were used to isolate the impact of asphalt grade and content at various temperatures. The results were used to validate the use of prepeak fracture energy and stiffness as key metrics to characterize low-temperature cracking potential. LCI was found to be sensitive to aging conditions and binder grade, while the air voids and binder content effect was discernible but secondary. Comparison of the LMLC and plant-mix lab-compacted specimens showed generally similar LCI values for AC mixes. Additionally, disc-shaped compact tension tests were performed on these mixtures to compare with the SLT-SCB results. Overall, the SLT-SCB procedure demonstrated both practicality and sensitivity for use within a BMD protocol, leveraging fundamental material properties to assess low-temperature cracking potential and rapid testing time as compared to LT-SCB.
19 June 2026 in Mechanics of Materials
11 May 2026 in International Journal of Pavement Engineering
Cracking, the creation of traction-free surfaces for energy release (Williams, 1965), is a predominant distress in asphalt concrete (AC) pavements. Cracks become more prevalent as binder stiffness ...