1 February 2025 in Physics of Fluids
Three-dimensional numerical simulations with detailed chemistry were conducted on a rotating detonation ramjet engine (RDRE) fueled by ethylene. The study compared the basic structure, combustion characteristics, and performance of the rotating detonation wave (RDW) between isometric and divergent combustors with varying divergent angles. The results reveal that the RDW propagates with a slight inclination relative to the circumferential direction in the divergent combustor, whereas it propagates with a larger inclination in the isometric combustor. The resultant velocity perpendicular to the RDW in the divergent combustor exceeds that in the isometric combustor and remains consistent across different divergent angles. Furthermore, the inclination angle adapts to variations in incoming flow velocity. In the divergent combustor, the incoming flow accelerates, depressurizes, and exhibits a lower static temperature, significantly suppressing the parasitic combustion caused by backward pressure perturbations. Additionally, the divergent combustor minimizes non-ideal heat release in the recirculation zone near the ramp corner. Consequently, the proportion of ethylene consumption associated with high heat release rates in the divergent combustor is significantly higher than in the isometric combustor. The suppression of parasitic combustion also enhances RDW propagation stability in the divergent combustor. Notably, the total pressure loss in the divergent combustor is reduced by 7.25% at the outlet compared to the isometric combustor, attributed to the absence of a recirculation zone at the ramp corner. These findings provide valuable insights for the design and optimization of RDRE configurations.
2 December 2025 in Aerospace Science and Technology
1 January 2026 in Physics of Fluids
Non-uniform fuel distribution in a rotating detonation engine (RDE) combustor is generally considered to induce local deflagration combustion, leading to the temperature stratification of the combustible mixture ahead of the detonation wave. To thoroughly investigate the propagation mechanism, the propagation processes of the detonation wave under the condition of temperature stratification are extracted and numerically performed. Through the process of decoupling and re-initiation induced by the inert gas layer, a quantitative analysis was conducted on the effects of temperature gradient and stratification ratio on the propagation process. The results demonstrate that the propagation process with an inert gas layer can be categorized into stable propagation, detonation attenuation entering the layer, re-initiation penetrating the layer, overdriven, and re-stabilization phases. The detonation wave within the high-temperature layer propagates ahead under temperature-stratified conditions. The pressure disturbance generated by expansion gives rise to a localized high-pressure zone, facilitating re-initiation and significantly reducing the re-initiation distance. The re-initiation distance decreases substantially with the increase of temperature gradient and stratification ratio. Furthermore, it is found that excessively wide inert gas layer diminishes the enhancing effect of stratification conditions on re-initiation. This finding provides valuable insights for the propagation mechanisms of detonation waves in the actual RDE combustor over complex thermodynamic conditions.