Shijie Liu

Shijie Liu

Auto-generated profile, based on publicly available information

Shijie Liu

College of Aerospace Science and Technology, National University of Defense Technology, Changsha 410073, China

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in Acta Astronautica
Verified
Journal Article
Closed access
SLShi-Jie Liu
Shi-Jie Liu
HPHao-Yang Peng
Hao-Yang Peng
WLWei-Dong Liu
Wei-Dong Liu
HZHai-Long Zhang
Hai-Long Zhang

1 February 2025 in Physics of Fluids
Verified
Journal Article
Closed access
YCYuting Chen
Yuting Chen
SLShijie Liu
Shijie Liu
HPHaoyang Peng
Haoyang Peng
SZShenghui Zhong
Shenghui Zhong
HZHailong Zhang
Hailong Zhang
WLWeidong Liu
Weidong Liu
Three-dimensional numerical simulations with detailed chemistry were conducted on a rotating detonation ramjet engine (RDRE) fueled by ethylene. The study compared the basic structure, combustion characteristics, and performance of the rotating detonation wave (RDW) between isometric and divergent combustors with varying divergent angles. The results reveal that the RDW propagates with a slight inclination relative to the circumferential direction in the divergent combustor, whereas it propagates with a larger inclination in the isometric combustor. The resultant velocity perpendicular to the RDW in the divergent combustor exceeds that in the isometric combustor and remains consistent across different divergent angles. Furthermore, the inclination angle adapts to variations in incoming flow velocity. In the divergent combustor, the incoming flow accelerates, depressurizes, and exhibits a lower static temperature, significantly suppressing the parasitic combustion caused by backward pressure perturbations. Additionally, the divergent combustor minimizes non-ideal heat release in the recirculation zone near the ramp corner. Consequently, the proportion of ethylene consumption associated with high heat release rates in the divergent combustor is significantly higher than in the isometric combustor. The suppression of parasitic combustion also enhances RDW propagation stability in the divergent combustor. Notably, the total pressure loss in the divergent combustor is reduced by 7.25% at the outlet compared to the isometric combustor, attributed to the absence of a recirculation zone at the ramp corner. These findings provide valuable insights for the design and optimization of RDRE configurations.

14 May 2020 in Combustion Science and Technology
Verified
Journal Article
Closed access
HPHao-Yang Peng
Hao-Yang Peng
WLWei-Dong Liu
Wei-Dong Liu
SLShi-Jie Liu
Shi-Jie Liu
HZHai-Long Zhang
Hai-Long Zhang
To settle the realization difficulty of continuous rotating detonation (CRD) fueled by hydrocarbon, a cavity-based annular combustor scheme was proposed in our previous study, and its feasibility was well demonstrated. This paper mainly focuses on effects of the cavity location on CRD. The results show that the CRD operating range reduces, as the cavity moves downstream. When cavity is arranged in the detonation zone, the cavity-stabilized flame is coordinated with the reaction zone of detonation. The cavity can intensify the CRD initiation, and CRD waves propagate as co-rotating two-wave mode with higher outlet pressure, higher frequency, and higher stability. When cavity is downstream arranged out the detonation zone, it has little impact on improving the CRD initiation. CRD waves propagate as counter-rotating two-wave mode with lower outlet pressure, lower frequency, and poor stability. In these cases, the majority of reaction zone of detonation concentrates on the upstream annular part, and the cavity-stabilized flame is separated from the reaction zone of detonation, acting as afterburning. A new quantitative approach, the axial distribution of chemiluminescence intensity, has been proposed in this paper, and the separation and move processes of cavity-stabilized flame are verified quantitatively based on it.

16 May 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
GWGuangyu Wang
Guangyu Wang
SLShijie Liu
Shijie Liu
HPHao-Yang Peng
Hao-Yang Peng
WLWeidong Liu
Weidong Liu
A continuous detonation engine with various exhaust nozzles, analogous to typical scramjet cavity combustors with variable rear-wall heights, was adopted to perform a succession of cylindrical air-breathing continuous rotating detonation experiments fueled by a non-premixed ethylene/air mixture. The results show that the detonation combustion was observed to self-sustain in the combustor through simultaneous high-speed imaging covering the combustor and isolator. A long test, lasting more than three seconds, was performed in this unique configuration, indicating that the cylindrical isolator–combustor engine exhibits potential for practical applications. Three distinct combustion modes were revealed with varied equivalent ratios (hybrid mode, sawtooth wave mode, and deflagration mode). The diameter of the nozzle throat was critical in the formation of rotating detonation waves. When the nozzle throat diameter was larger than the specific value, the detonation wave could not form and self-sustain. The upstream boundary of the shock train was supposed to be close to the isolator entrance in conditions of a high equivalence ratio and small nozzle throat diameter. In addition, it was verified that periodic high-frequency pressure oscillation could cause substantial impacts on the incoming flow as compared with the steady deflagration with the same combustor pressure.

1 June 2024 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
WFWeijie Fan
Weijie Fan
HPHao-Yang Peng
Hao-Yang Peng
SLShijie Liu
Shijie Liu
SZShenghui Zhong
Shenghui Zhong
WLWeidong Liu
Weidong Liu
XYXueqiang Yuan
Xueqiang Yuan
A noncircular cross-sectioned combustor holds the potential to facilitate the flexible design of continuous rotating detonation (CRD) engines, meeting the demands of airframe/engine integration. In this study, we propose and validate a novel rounded-rectangle hollow combustor comprising arc and straight segments. We conduct experimental and numerical investigations into the detailed propagation and combustion characteristics of the CRD wave in this combustor. The results demonstrate that a single hydrogen–air CRD wave can be achieved and sustained over a wide equivalence ratio (ER) range. As the ER increases from 0.71 to 1.25, the CRD wave's propagation velocity escalates from 1837.1 to 2190.8 m/s, with a substantial decrease in the relative standard deviation from 9.76% to 0.85%. The curvature variation along the combustor circumference influences the local propagation velocity, combustion intensity, shock wave strength, and shock wave system. Specifically, the constraints imposed by the arc segment significantly enhance combustion intensity and amplify shock wave strength. This is evident through a higher heat release rate fraction (fHRR), increased pressure peaks, and elevated propagation velocity. At the straight segment, the shock wave system comprises the CRD wave, leading, and trailing diffracted shock waves. However, the constraint from the arc segment leads to the formation of an additional reflected shock wave, altering the shock wave system to include the CRD wave, the reflected shock wave, and the leading diffracted shock wave. Thus, this study advances our understanding of CRD characteristics in noncircular cross-sectioned combustors, providing insight to the design theory for CRD engine combustors.

1 February 2025 in Physics of Fluids
Verified
Journal Article
Closed access
WFWeijie Fan
Weijie Fan
HPHaoyang Peng
Haoyang Peng
XYXiaofei Yue
Xiaofei Yue
SLShijie Liu
Shijie Liu
HZHailong Zhang
Hailong Zhang
SZShenghui Zhong
Shenghui Zhong
In this short letter, simultaneous high-speed schlieren and chemiluminescence imaging is demonstrated in a rounded-rectangle continuous rotating detonation combustor for the first time. Typical flowfield structures of the continuous rotating detonation (CRD), such as the fuel injection structure, fresh combustible mixture layer, detonation wave, and the downstream oblique shock wave, are clearly identified by the schlieren images. Integral of chemiluminescence intensity (ICI) of the simultaneous schlieren and chemiluminescence images fluctuates periodically, indicating the rotation motion of the shock wave and reaction zone, and the propagation frequency of CRD wave can be obtained by the fast Fourier transform on the ICI results. The induced shock wave and the front of the reaction zone are highly coincident in the simultaneous schlieren and chemiluminescence images. Furthermore, the frequencies of the local ICI in a monitor area at the same circumferential position of schlieren and chemiluminescence images well coincide with each other, which quantitatively verified that the non-premixed CRD wave is an interacted structure of induced shock wave coupled with the following reaction zone. Simultaneous high-speed schlieren and chemiluminescence imaging demonstrates great potential for characterizing detailed flowfield structures and propagation characteristics of CRD wave.