10 December 2019 in Geophysical Research Letters
Triggered or induced earthquakes have been widely reported as resulting from various human activities, yet seismicity triggered by small‐scale infrastructure construction is rare. Here, we report on an investigation of an extremely shallow Mw4.1 earthquake which occurred on 11 August 2016 in the Sichuan Basin (China), a region with historically low seismicity. Our seismic waveform analyses indicate an almost pure thrust focal mechanism at a centroid depth of ~1 km. Furthermore, 18 Sentinel‐1 synthetic aperture radar interferograms, stacked to obtain subcentimeter accuracy, reveal up to 3 cm line‐of‐sight deformation which overlaps with an automotive testing site constructed in 2014. Removal of 10 m of a surface rock layer during the construction may have produced an unloading effect and resulted in up to 0.11 MPa Coulomb stress changes on a blind fault, larger than the 0.01 MPa threshold typically invoked in studies of tectonic earthquakes. However, the delayed triggering still requires further investigation.
4 August 2017 in Geophysical Journal International
Teleseismic body waves are essential for imaging rupture processes of large earthquakes. Earthquake source parameters are usually characterized by waveform analyses such as finite fault inversions using only turning (direct) P and SH waves without considering the reflected phases from the core–mantle boundary (CMB). However, core-reflected waves such as ScS usually have amplitudes comparable to direct S waves due to the total reflection from the CMB and might interfere with the S waves used for inversion, especially at large epicentral distances for long duration earthquakes. In order to understand how core-reflected waves affect teleseismic body wave inversion results, we develop a procedure named Multitel3 to compute Green's functions that contain turning waves (direct P, pP, sP, direct S, sS and reverberations in the crust) and core-reflected waves (PcP, pPcP, sPcP, ScS, sScS and associated reflected phases from the CMB). This ray-based method can efficiently generate synthetic seismograms for turning and core-reflected waves independently, with the flexibility to take into account the 3-D Earth structure effect on the timing between these phases. The performance of this approach is assessed through a series of numerical inversion tests on synthetic waveforms of the 2008 Mw7.9 Wenchuan earthquake and the 2015 Mw7.8 Nepal earthquake. We also compare this improved method with the turning-wave only inversions and explore the stability of the new procedure when there are uncertainties in a priori information (such as fault geometry and epicentre location) or arrival time of core-reflected phases. Finally, a finite fault inversion of the 2005 Mw8.7 Nias–Simeulue earthquake is carried out using the improved Green's functions. Using enhanced Green's functions yields better inversion results as expected. While the finite source inversion with conventional P and SH waves is able to recover large-scale characteristics of the earthquake source, by adding PcP and ScS phases, the inverted slip model and moment rate function better match previous results incorporating field observations, geodetic and seismic data.
28 January 2019 in Journal of Geophysical Research: Solid Earth
The complex near trench velocity structures, characterized by strongly varying bathymetry along with seawater, can produce substantial waveform complexities for near trench earthquakes, which makes it difficult to study earthquake source parameters through waveform modeling/inversion. Here we explore these wavefield complexities via modeling teleseismic records of a Mw6.6 near coast event and a Mw6.8 near trench event in the 2015 Illapel earthquake sequence. For the near coast event, the waveforms of direct P waves at teleseismic/diffracted distances are simple, and we obtain consistent source parameters between 1D regional and teleseismic waveform inversions. In contrast, the near trench event produces stronger and longer P coda waves (>100 s), resulting in many dramatic discrepancies between the regional and teleseismic inversions, in particular for the centroid depth. We adopt a spectral element method‐direct solution method hybrid approach to simulate synthetics with the complex source‐side 3‐D structures (bathymetry and water layer in this case) and investigate their roles in the genesis of strong P coda waves. Compared with the 1‐ and 2‐D synthetics, the 3‐D synthetics significantly improve the waveform fits up to 0.1 Hz when the source is placed at the preferred horizontal (~30 km from the trench axis) and vertical (~5 km beneath the ocean bottom) location. The refined location of the earthquake indicates that the plate interface is probably locked at very shallow depths and capable of nucleating strong earthquakes. We highlight the need for considering near trench 3‐D structures in seismic waveform analysis of near trench earthquakes, many of which are tsunamigenic.
9 May 2024 in IEEE Transactions on Geoscience and Remote Sensing
At present, the 3-D magnetotelluric (MT) unstructured finite element modeling approaches often adopt the block-wise uniform conductivity parameterization method, in which the Earth conductivity model is discretized into plenty of tetrahedrons with uniform conductivity. However, that block-wise uniform parameterization method is not only difficult to accurately simulate actual continuous subsurface conductivity distribution, but also would substantially increase the unknowns in the subsequent inversion, which largely aggravates the non-uniqueness of inversion. In this study, we propose a 3-D unstructured finite element modeling strategy of MT problems allowing for continuous variation of conductivity in each tetrahedron. First, the curl–curl governing differential equation of electrical field for the 3-D MT problems and the corresponding integral weak form are derived successively. Next, the open-source tetrahedral mesh generator Tetgen is utilized to discretize the computational domain, both the conductivity and the electric field within each tetrahedral element are approximated by using linear interpolation with node and edge vector basis functions, respectively. Then, the closed-form expression of the resulting elemental integral is derived and the Newman-type boundary condition is loaded. The resulting system of linear equations is solved by using the direct LU decomposition method. Further, to enhance the accuracy of the solution, a goal-oriented adaptive technology based on the continuity of the normal component of the current density is adopted. Finally, the correctness of the proposed algorithm is verified by using a layered model with continuous conductivity distribution and a 3-D topographic model. While the necessity of considering the continuous variation of conductivity in blocks is proved by using two 3-D continuum models. The results show that the proposed algorithm can obviously improve the accuracy of the responses at the sites above the region with continuous conductivity distribution and will greatly reduce the unknowns of the subsequent inversion, compared with the traditional algorithm with block-wise uniform parameterization.
12 August 2022 in Seismological Research Letters
The 2020 6.0 Jiashi earthquake is the largest event recorded in the Jiashi region in the last 17 yr. Here we try to explore the primary characteristics of this event by using dynamic rupture modeling, and later compare our results with the Interferometric Synthetic Aperture Radar (InSAR) data and near‐source ground‐motion observations. To focus on the geometric effects of the seismogenic fault, we conduct spontaneous rupture simulations in a homogenous material by using a linear slip‐weakening friction law. Our results show that the synthetic data fits well with the observations, including the InSAR data and strong ground‐motion waveforms. Significantly, the low dip angle segments at both ends of the rupture area along the dip‐slip direction have behaved as “stress barriers,” which stop the rupture propagation. In other words, the rupture could be arrested by the near‐horizontal segments rather than being prevented by the steeper ramp proposed by the previous studies. Thus, our physics‐based dynamic modeling shows how the fault geometry controls the 2020 6.0 Jiashi earthquake rupture. Our work contributes to understand the complex nature of the low dip angle listric‐reverse fault.
28 April 2021 in Seismological Research Letters
Landslides are dramatic and complex surface processes that can result in extensive casualties and property damage. The broadband seismic signals generated by landslides provide datasets essential for understanding time‐dependent sliding processes. However, traditional methods for computing Green’s functions based on wavenumber integration converge very slowly for surface sources, especially at high frequencies. Usually, long‐period synthetic waves with a cutoff ‐integral for an approximated near‐surface source are adopted for landslide studies, which may lead to artifacts. Thus, the development of efficient methods for computing the broadband Green’s functions of surface sources is important. The generalized reflection and transmission method with the peak‐trough averaging technique can overcome the difficulties in wavenumber integration for surface sources, quickly converging even for high‐frequency calculations. We use this improved method to compute Green’s functions for surface single‐force sources and invert the force histories of the 2017 devastating Xinmo landslide in different frequency bands. The results indicate that the complex sliding process of this drastic event can be revealed by broadband signals (0.02–0.5 Hz), and that the initiation stage of this event shows a dominant frequency up to 0.2 Hz.