21 June 2022 in Inorganic Chemistry Frontiers
Transition metals and their compounds supported on graphene are promising electrocatalysts for application. Their catalytic performance benefits from the vacancy defects of these electrolytes. However, the facile and effective generation of vacancy defects is still a challenge, and the role of vacancy defects is also unclear. In this work, an efficient radio-frequency (RF) plasma treatment strategy has been employed to achieve sulfur vacancies and oxygen vacancies in electrocatalysts for the oxygen evolution reaction. H2, Ar/H2, and Ar were used for the generation of plasma, respectively. Plasma treatment was found to reduce Co3+ to Co2+, and create sulfur and oxygen vacancy defects on the surface of cobalt compounds and graphene. The reactive radicals generated by plasma reduce graphene oxide to graphene nanosheets, which provide space for the movement of carriers and nanoparticles. Among the three different plasma systems, the H2 plasma has the most prominent ability to create vacancy defects in the electrocatalysts. The XRD pattern and Raman spectrum of the catalyst prepared by H2 plasma show large displacement, indicating that the plasma is responsible for changing the lattice parameters and cell volume, and vacancy defect structure of the sample. The overpotential of H2-VS/rGO was 340 mV at 50 mA cm−2 and the Tafel slope was 84.4 mV dec−1. After 12 hours of amperometric i–t curve test, its OER performance was found to surpass that of IrO2. DFT calculation results show that the vacancy defects effectively regulate the electronic structure, enhance the electron migration efficiency and promote the adsorption process of OER. The method of plasma treatment for creating vacancy structures is facile and effective, which provides a new route for the preparation of OER catalysts.
22 October 2020 in IEEE Transactions on Plasma Science
Liquid dielectrics are widely used in high-voltage transformers owing to their excellent insulation properties. Space charge injected from electrodes can damage power systems. It is believed that space charge dynamics are related to the electrodes surface closely. In this study, surface modifications of copper and stainless-steel electrodes deposited by SiO₂ and TiO₂ nanostructured films with radio frequency magnetron sputtering were investigated. The films were characterized. The effects of the films on the breakdown voltage and space charge dynamics characteristics of the propylene carbonate were studied. These results indicate that when a TiO₂ nanostructured film was deposited on the stainless-steel electrode, the breakdown voltage of the propylene carbonate increased by 7.3%, and when SiO₂ and TiO₂ films were deposited on the copper electrode, the increases were 7.4% and 10.2%, respectively. Furthermore, the amount of charge injection of the stainless-steel electrode was lower than that of the copper electrode, and the nanostructured films markedly suppressed the space charge. Both the TiO₂ and SiO₂ nanostructured films sputtered on the electrode surface changed the barrier height of the solid-liquid interface and reduced the depth and amount of charge injection. Compared with a sputtered SiO₂ film, the TiO₂ film had a better space charge suppression effect.
28 November 2022 in IEEE Transactions on Instrumentation and Measurement
This paper proposes a Kerr effect electric field measurement method based on a concave spherical mirror conjugate structure (CSM CS) for a transient electric field in low Kerr constant liquid dielectrics. The accuracy of transient electric field measurement can be greatly improved in a limited space by multiple small-angle reflections. To verify the effect of the proposed structure, the electric field distribution is measured in propylene carbonate (PC) with a high Kerr constant at a switching overvoltage. The measurement results show that the electric field error of PC under an extremely low electric field is only about 2%. The novel structure improves the electric field measurement accuracy of a liquid with high kerr constant. Then, the whole device is applied to the transformer oil, and the accuracy of the measured electric field is also greatly improved. At the same electrode size, the sensitivity of measuring the electric field with the proposed structure is three times that without it. The analysis results show that the introduction of the proposed structure has little effect on the electric field measurement. The proposal and application of the proposed CSM CS further expand the electric field measurement range based on the Kerr effect and improves the electric field measurement accuracy.
8 March 2022 in IEEE Transactions on Dielectrics and Electrical Insulation
Temperature can change the charge injection and migration characteristics in the liquid, affecting the insulation performance. First, the influence of temperature on the permittivity and Kerr constant of the liquid dielectric is studied. Also, the results prove that the permittivity and Kerr constant of propylene carbonate (PC) decrease with the increase of temperature. Moreover, to explore the influence of temperature on the insulation performance of propylene carbonate, we build a temperature-controllable breakdown test platform under voltage impulse, and the breakdown voltage of PC increases slightly with the increase in temperature. Based on the electrooptic effect, an optical platform is built to measure the electric field under the switching overvoltage. In addition, the space charge distribution is calculated, and the results indicated that the temperature in the range of 10 °C–40 °C is negatively correlated with the net space charge injection. Finally, the temperature effect on the rate of change and mobility of the space charges is explored.