Bath Process Intensification Laboratory and Centre for Advanced Separations Engineering, Department of Chemical Engineering, University of Bath, BA2 7AY, UK
Auto-generated profile, based on publicly available information
Darrell Alec Patterson
Bath Process Intensification Laboratory and Centre for Advanced Separations Engineering, Department of Chemical Engineering, University of Bath, BA2 7AY, UK
Additive manufacturing, likewise known as 3-dimensional (3D) printing and rapid prototyping, has the ability to create almost any geometrically complex shape or feature in a range of materials across different scales. It has found its applications in various areas, such as medicine (bioprinting), art, manufacturing and engineering. On the other hand, its use in separation membrane engineering is relatively new. The use of additive manufacturing techniques could provide more control towards the design of separation membrane systems and offers novel membrane preparation techniques that are able to produce membranes of different shapes, types and designs which cannot be made using conventional techniques such as phase inversion or sintering. Here we provide key background information on 3D printing technologies and applications in membrane engineering; a discussion of the potential and limitations of current 3D printing technologies for membrane engineering and future aspects of the technology. Due to the potential benefits of 3D printing in membrane manufacturing, in particular the unprecedented control over membrane architecture the technique could allow, the use of 3D printing in membrane systems should see significant growth in the near future
1 June 2010 in Applied Catalysis B: Environment and Energy
Poly(vinylidene fluoride) (PVDF) and its main copolymers - poly(vinylidene fluoride-co-hexafluoropropene), P(VDF-HFP), and poly(vinylidene fluoride-co-trifluoroethylene), P(VDF-TrFE) - were processed by solvent casting at room temperature in the form of porous membranes. Copolymer membranes showed higher degree of porosity than PVDF, the average pore size being larger for P(VDF-TrFE) than for P(VDF-HFP) and PVDF. All membranes show high hydrophobicity with water contact angles in the range 94° to 115°, and electroactive beta phase contents above 90%. The adhesion and proliferation of both C2C12 myoblast and MC3T3-E1 pre-osteoblast cells on the membranes were investigated. It is demonstrated that PVDF membranes promote higher cell proliferation while P(VDF-HFP) membranes show the lowest proliferation for both kinds of cell. The proliferation on P(VDF-TrFE) membranes is cell dependent, higher for MC3T3-E1 cells but lower for C2C12 cells, related to the effect of the highly porous structure on the preferred morphology of each cell type, as the higher pore size and porosity of the P(VDF-TrFE) membrane induce cell elongation, which is preferred just by the C2C12 muscle cells
1 September 2013 in Chemical Engineering Research and Design