1 January 2019 in Géotechnique
This study explores the effect of stress state on small-strain modulus (Gmax) in the naturally occurring Ganga sand and silt using bender elements during a series of carefully performed undrained triaxial tests. Unlike previous studies with drained shearing or testing of dry samples, the undrained shearing is chosen here to decouple the effects of void ratio and stress state on the small-strain stiffness. The results from undrained shearing of anisotropically and isotropically consolidated medium dense sand specimens are compared by keeping the same relative density and matching the initial mean effective pressure. The measured Gmaxvalues show stress path dependency – that is, it is a function of both mean effective stress and deviatoric stress. This behaviour of Gmaxis captured well by a non-linear isotropic model following the energy conservation principle, which incorporates the effect of both mean effective stress and deviatoric stress. The stress–strain response of soil provides some interesting observations, such as the strain hardening occurs mostly at constant effective stress ratio and the stress ratio at phase transition varies with the effective confinement. Experiments with varying silt content in the sand indicate that higher fines content results in slightly lower Gmaxvalues, mainly due to the lower values of mean effective stress and deviatoric stress during undrained shearing.
6 June 2020 in Acta Geotechnica
3 June 2020 in Acta Geotechnica
KKKonstantinos Karapiperis
1 January 2017 in International Journal of Geomechanics
The emergence of possible instability modes under undrained biaxial shear of sand was investigated to develop better understanding about the onset of localized and liquefaction-type solid-fluid instability modes using a generalized three-dimensional (3D) material model. These two modes are the primary instability modes that can exist in most cases while conducting undrained biaxial testing of sand at different densities, confining pressures, and boundary conditions. Using a 3D rate-independent and nonassociative constitutive model, the instability analysis was performed as a plane-strain bifurcation problem from a uniform stress-strain state. Large deformation formulation was used to simulate the biaxial test configuration with both rigid and flexible boundaries in the lateral direction. The existing theoretical framework of solid-fluid instability analysis under rigid boundaries was extended to the flexible lateral boundary condition. Interestingly, the onset of solid-fluid instability modes is significantly influenced by the choice of boundary conditions. The trends for the onset of various undrained instability modes were assessed as a function of material state variables.
25 October 2012 in Geotechnical and Geological Engineering
6 March 2015 in Acta Geotechnica