10 August 2018 in Scientific Reports
Tin selenide (SnSe) has been the subject of great attention in the last years due to its highly efficient thermoelectricity and its possibilities as a green material, free of Pb and Te. Here, we report for the first time a thermoelectricity and transport study of individual SnSe micro- and nano-wires with diameters in the range between 130 nm and 1.15 μm. X-ray diffraction and transmission electron microscopy analyses confirm an orthorhombic SnSe structure with Pnma (62) symmetry group and 1:1 Sn:Se atomic ratio. Electrical and thermal conductivity and the Seebeck coefficient were measured in each individual nanowire using a specialized suspended microdevice in the 150–370 K temperature range, yielding a thermal conductivity of 0.55 Wm−1 K−1 at room temperature and ZT ~ 0.156 at 370 K for the 130 nm diameter nanowire. The measured properties were correlated with electronic information obtained by model simulations and with phonon scattering analysis. The results confirm these structures as promising building blocks to develop efficient temperature sensors, refrigerators and thermoelectric energy converters. The thermoelectric response of the nanowires is compared with recent reports on crystalline, polycrystalline and layered bulk structures.
2 July 2018 in Nanotechnology
Highly crystalline indium tin oxide (ITO) nanowires were grown via a vapor–liquid–solid method, with thermal tolerance up to ∼1300 °C. We report the electric and thermoelectric properties of the ITO nanowires before and after heat treatments and draw conclusions about their applicability as thermoelectric building blocks in nanodevices that can operate in high temperature conditions. The Seebeck coefficient and the thermal and electrical conductivities were measured in each individual nanowire by means of specialized micro-bridge thermometry devices. Measured data was analyzed and explained in terms of changes in charge carrier density, impurities and vacancies due to the thermal treatments.
7 December 2020 in Nanotechnology
Antimony selenide (Sb 2 Se 3 ) is a material widely used in photodetectors and relatively new as a possible material for thermoelectric applications. Taking advantage of the new properties after nanoscale fabrication, this material shows great potential for the development of efficient low temperature thermoelectric devices. Here we study the synthesis, the crystal properties and the thermal and thermoelectric transport response of Sb 2 Se 3 hexagonal nanotubes (HNT) in the temperature range between 120 and 370 K. HNT have a moderate electrical conductivity ∼10 2 S m −1 while maintaining a reasonable Seebeck coefficient ∼430 μ V K −1 at 370 K. The electrical conductivity in Sb 2 Se 3 HNT is about 5 orders of magnitude larger and its thermal conductivity one half of what is found in bulk. Moreover, the calculated figure of merit (ZT) at room temperature is the largest value reported in antimony selenide 1D structures.
25 October 2018 in Nanotechnology
Semiconductors with magnetic response at room temperature are sought for spintronics in solid-state devices. Among possible materials for this applications, the magnetic response of FeSi and doped FeSi have produced contradictory results at the nanoscale and more precise measurements and deeper studies are needed to clarify its potential capabilities. For that reason, in this work, single nanowire measurements of ferromagnetic semiconducting FeSi and Mn-doped FeSi nanostructures have been performed using magnetic force microscopy and electron holography. Results obtained confirm the presence of magnetic domains at room temperature with a magnetic moment per Fe atom of [Formula: see text] Spin polarized density functional calculations confirm a net magnetic moment between [Formula: see text] in Fe surface atoms with an estimated Curie temperature of 417 K by means of the molecular field approximation. The nanowires present a crystalline B20 cubic structure as confirmed by x-ray diffraction and high-resolution electron microscopy. Their electrical transport measurements confirm p-type nature and thermal activation. A remanent magnetization of 1.5 × 10-5 emu and 0.5 × 10-5 emu was measured at room temperature for FeSi and Mn-doped FeSi respectively, with spin freezing behavior around 30 K for the Mn-doped nanowires.
27 May 2020 in Journal of Applied Physics
The discovery of single-phase multiferroic materials and the understanding of intriguing physics of the coupling mechanisms between their spin and polarization are important for the next generation of multifunctional devices. In this work, we report dielectric, ferroelectric, and magnetization results of Pd-substituted room-temperature magnetoelectric multiferroic Pb(Zr0.20Ti0.80)0.7Pd0.3O3 (PZTPd) thin films. Highly c axis oriented PZTPd thin films were grown on {(LaAlO3)0.3(Sr2AlTaO6)0.7} substrates using the pulsed laser deposition technique. These films were phase pure and stabilized in a tetragonal phase. Atomic force microscopic studies indicated a homogeneous distribution of grains on the films' surface with a surface roughness (RQ) of ∼5.4 nm. A large dielectric constant of ∼1780 and a low loss tangent value of ∼0.52 were observed at 1 kHz measured at room temperature. Temperature dependent dielectric studies on Pt/PZTPd/La0.7Sr0.3MnO3 metal–insulator–metal heterostructure capacitors between 80 and 660 K indicated a diffused ferroelectric to paraelectric phase transition around 515 K. The polarization hysteresis loops observed at room temperature were attributed to its ferroelectric behavior. Saturated magnetization hysteresis loop with remanent magnetization of 1.54 emu/cm3 was obtained at room temperature. Ferromagnetic ordering in thin films was found to sustain in the entire temperature range from 5 to 395 K, as revealed from the constant behavior of the dM/dT curve with temperature. The mixed oxidation states of palladium (Pd2+/Pd4+) dispersed in the polar Pb(Zr0.20Ti0.80)O3 matrix were revealed from our high resolution x-ray photoelectron spectroscopic studies and is ascribed to the origin of ferromagnetic ordering in the film. These findings suggest that PZTPd thin films are multiferroic (ferroelectric–ferromagnetic) at room temperature.
3 December 2018 in Journal of Applied Physics
We report the synthesis of high Curie temperature (TC > 800 K) Mn-doped CoSi nanowires. CoSi and Co1–xMnxSi nanowires were synthesized by chemical vapor deposition. Transmission electron microscopy was used to identify a crystalline B20 cubical structure. Zero-field cooling and field cooling measurements confirm spin disorder behaviour at low temperatures. The magnetic properties of doped samples were explained by means of the Ruderman-Kittel-Kasuya-Yosida interaction where the localized Mn atoms interact with the conduction electrons in CoSi providing a net ferromagnetic moment and explaining spin disorder at low temperatures. An individual CoSi nanowire was experimentally analyzed by performing off-axis electron holography, providing information about its local magnetization. Density functional theory calculations were performed to understand the effects of Mn doping, Si-vacancies, and surface atoms in the magnetic properties at the surface of the nanowire. An estimation of the Curie temperature was made using the mean field approximation.