1 July 2024 in IEEE Access
The significance of the functional dependability problem of distributed control systems is constantly increasing due to the spread of inexpensive controllers and sensors and the creation of Internet of Things (IoT) systems. In the case of distributed control of multi-zone objects with the mutual influence of zones, the problem is complicated by changes in the operating modes of local control systems (LCS) due to the failures of elements of the systems of neighbouring zones. This, in turn, leads to a change in their failure rates. In this work, the functional dependability model of the decentralized distributed control system for multi-zone objects was developed and investigated. The model is obtained in the form of an inhomogeneous Markov chain of the system states caused by failures of elements of LCS. The probabilities of transitions between states are described by the Chapman-Kolmogorov equations and additional equations that describe the relationship between the parameters of neighbouring zones and the corresponding LCS. The impact of Data Transmission System (DTS) overload, controller failures, sensor failures, and DTS failures on the probability of the zones’ state exceeding the permissible limits was studied. The functional safety assessment model of decentralized control of multi-zone objects, proposed in the previous works of the author was used for the theoretical analysis. Verification of the theoretical model is achieved through simulation, leveraging a library of modules developed by the authors on the Scilab/Xcos platform. The simulation showed that the "cascade failures" process is probable for multi-zone objects with coordinated control according to a global criterion and a strong connection between the parameters of the zones, which leads to the rapid loss of functional dependability.
1 January 2022 in Complexity
With local control of a large number of objects that mutually influence each other, the problem of coordinating local control systems to achieve the best overall result arises. If the structure of the system (the number of control objects and the parameters of interaction) can change frequently, then the process of setting up/training a centralized coordinator will take an unacceptably large part of the action time and require a significant amount of resources. In this work, the use of decentralized coordination is proposed to solve the problem. As a basic task for research on decentralized coordination control of objects that mutually influence each other, stabilizing the comfort temperatures was set in multizone rooms using movable heaters. Providing individual thermal comfort is an important problem. In particular, there are many multiarea premises with conflicting requirements for the comfort of habitats. This problem can be solved with the help of movable heaters and air conditioners. However, the presence of heat flows between areas with different specified parameters makes it difficult to adjust them. The work aims to improve the quality of thermal control in multiarea premises with a dynamic structure for the location of movable heaters. To achieve this goal, we proposed the concept of Movable Smart Heaters (MSH). A group of Movable Smart Heaters that could influence each other and exchange information forms a dynamic system with a changing structure since switching on/off or moving one MSH to another area changes the mutual influence and connections in the system. The criteria for control quality are defined and evaluated. The proposed coordination algorithms make it possible to optimize the operating modes of the system automatically when its structure and/or settings are changed. Simulation of the system is performed with the use of a worked‐out modelling library in Scilab. The results of comparing the MSH system’s efficiency show an increase in comfort while reducing energy consumption.
13 January 2025 in IEEE Access
The control process of technological facilities with resource interaction in a decentralized system requires coordination of local systems for control of the state of objects. For the implementation of coordination methods, learning systems have an advantage since they can flexibly adapt to the specifics of each facility control. However, the coordinators’ training process is complicated by the lack of labelled datasets for technological facilities. In decentralized control systems, the problem is complicated by the need to train all coordinators, with the outcome depending on the coordinator’s position within the structure of the distributed control system. This article explores the prospects of model-based learning for solving the problem of missing datasets used for coordinators’ training. An approach to determining the optimal statistics of the training dataset for the coordination control of nonlinear technological facilities with resource interaction is proposed. A combined three-stage process of coordinator training for the decentralized system is proposed. In the first stage, one coordinator is trained on the basis of a distributed system simulation. In the second stage, the settings of the trained coordinator are applied to other coordinators, which are retrained in parallel on the basis of simulation models of local control systems of the relevant parts of the technological facilities. In the third stage, coordinators are fine-tuned to real conditions using Bayesian random search. Conducted experimental studies of the proposed method of training neural network coordinators, implemented on Python TensorFlow, showed greater effectiveness of Collaborative Federated Learning compared to independent training of coordinators or direct transfer of learning outcomes between coordinators.
30 March 2020 in Automation of technological and business processes
In the article the model of one-level coordination of production processes is created and indicators of wave synchronous coordination algorithm are investigated. It is shown that in case of high complexity and fast reaction of elements to random perturbations, the case is possible when the required period of initiation of the coordination wave becomes less than the wave propagation through the system, i.e. the coordination time.
27 June 2025 in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
The research is aimed at increasing the accuracy of forecasting the state of multi-zone thermal facilities. Such facilities include multi-room premises, multi-zone greenhouses, tunnel kilns for brick production, and others. The high inertia of such facilities reduces the effectiveness of "ad hoc control". Modern proactive control systems based on forecasting are mainly based on using neural network training. However, to forecast the state of a specific multi-zone thermal facility, training the network requires a very large dataset, which is difficult to create and use. A combined neuro-structural method for forecasting the state of multi-zone thermal facilities is proposed, in which the structure of the neural model reflects the structure of the mutual influence of the facility zones. The research of the method has shown the possibility of ensuring sufficiently high forecast accuracy with a smaller size of the training dataset.
18 June 2025 in Optoelectronic Information-Power Technologies
Melanoma, a highly malignant skin tumor, relies on its Depth of Invasion (DoI) as a critical metric for assessing tumor malignancy, predicting patient prognosis, and guiding treatment strategies. Traditional DoI measurement methods are manual, time-consuming, and prone to errors due to complex tissue morphologies and the need for fine annotations. This study introduces a novel Convolutional Neural Network (CNN)-based framework that integrates image patch classification with morphological processing to achieve high-precision DoI prediction under coarse annotations. The approach comprises four modules: pathology tissue differentiation using Otsu thresholding and morphological operations, lesion and epidermal region identification via EfficientNetB0 classification, and DoI measurement through least-squares boundary fitting. Experimental results on a melanoma dataset demonstrate a Mean Absolute Error (MAE) of 0.503 mm and a Root Mean Square Error (RMSE) of 0.169 mm, significantly outperforming traditional segmentation networks such as UNet and Attention-UNet. This method provides a robust and efficient solution for automated melanoma diagnosis, with substantial potential for clinical translation.