This article presents a 36-channel scanning light detection and ranging (LiDAR) sensor with an on-chip single-photon avalanche diode array. The sensor has an area-efficient 11-bit in situ histogramming time-to-digital converter with a 3000 ×78 μm 2 per channel area based on a mixed-signal accumulator, though it is incorporated with histogramming and filtering capabilities. Furthermore, owing to its embedded interference (IF) filter, the sensor can perform reliable direct time-of-flight measurements even with IF from 32 different LiDAR sensors. The LiDAR system also has a beam scanner that comprises dual laser diodes for IF elimination and a hybrid mirror such that high-resolution images with a resolution of 2200 ×36 can be acquired with a wide field-of-view of 120 ° ×8 ° .
20 Mega-Hertz-switching high speed image shutter device for 3D image capturing and its application to system prototype are presented. For 3D image capturing, the system utilizes Time-of-Flight (TOF) principle by means of 20MHz high-speed micro-optical image modulator, so called 'optical shutter'. The high speed image modulation is obtained using the electro-optic operation of the multi-layer stacked structure having diffractive mirrors and optical resonance cavity which maximizes the magnitude of optical modulation. The optical shutter device is specially designed and fabricated realizing low resistance-capacitance cell structures having small RC-time constant. The optical shutter is positioned in front of a standard high resolution CMOS image sensor and modulates the IR image reflected from the object to capture a depth image. Suggested novel optical shutter device enables capturing of a full HD depth image with depth accuracy of mm-scale, which is the largest depth image resolution among the-state-of-the-arts, which have been limited up to VGA. The 3D camera prototype realizes color/depth concurrent sensing optical architecture to capture 14Mp color and full HD depth images, simultaneously. The resulting high definition color/depth image and its capturing device have crucial impact on 3D business eco-system in IT industry especially as 3D image sensing means in the fields of 3D camera, gesture recognition, user interface, and 3D display. This paper presents MEMS-based optical shutter design, fabrication, characterization, 3D camera system prototype and image test results.
The amplitude variation of the interferent signal can be caused since the object surface is uneven and the reaction angle can be varied according to the object motion. The amplitude variation causes an error in the signal processing algorithm. This error distorts the output signal. In order to eliminate this dependence of the interferent signal on the amplitude variation, two kinds of analog feedforward automatic gain control (AGC) which have more simple structure and higher bandwidth than that of the feedback method are proposed. Electronic circuits are constructed to implement the proposed AGC algorithms. The brief analysis, the measurement scheme of the system, and the experimental results of the AGCs using a laser Doppler vibrometer are presented. They demonstrate that the proposed AGCs are proven to make the system robust to the amplitude variation of the interferent signal