12 May 2023 in ACS Energy Letters
16 February 2024 in ACS Energy Letters
MBMahdi Malekshahi Byranvand
Mahdi Malekshahi Byranvand
+8
26 June 2021 in Advanced Functional Materials
Inorganic hole‐transport layers (HTLs) are widely investigated in perovskite solar cells (PSCs) due to their superior stability compared to the organic HTLs. However, in p–i–n architecture when these inorganic HTLs are deposited before the perovskite, it forms a suboptimal interface quality for the crystallization of perovskite, which reduces device stability, causes recombination, and limits the power conversion efficiency of the device. The incorporation of an appropriate functional group such as sulfur‐terminated surface on the HTL can enhance the interface quality due to its interaction with perovskite during the crystallization process. In this work, a bifunctional Al‐doped CuS film is wet‐deposited as HTL in p–i–n architecture PSC, which besides acting as an HTL also improves the crystallization of perovskite at the interface. Urbach energy and light intensity versus open‐circuit voltage characterization suggest the formation of a better‐quality interface in the sulfide HTL–perovskite heterojunction. The degradation behavior of the sulfide‐HTL‐based perovskite devices is studied, where it can be observed that after 2 weeks of storage in a controlled environment, the devices retain close to 95% of their initial efficiency.
5 July 2023 in Chemistry of Materials
20 May 2025 in IEEE Journal on Flexible Electronics
Liquid metals (LM), such as Galinstan (an alloy of GaInSn), make an excellent conductor with high conductivity and freedom of movement in stretchable electronics (SE). However, the combined effect of stretching and current passing through the circuit on the thermal behavior needs to be understood. In this work, we investigate the impact of the changing device parameters due to applied strain on the generated Joule heat and resulting temperature change. A fully automated spray-coating based stencil-printing method of Galinstan is used to achieve reproducible and reliable devices. Results show the combined effects of the decreasing trace cross-section, the reducing distance between wires and the decreasing thermal resistance of encapsulant results in a linear increase in the surface temperature and internal temperature when stretching. Finally, using custom cyclic stretch testers, we report the robustness of stretchable devices surviving at least 400 000 cycles at 25% strain. Several prototypes of wearable devices, smart patches and sensors are presented. Our automated fabrication process and operando analysis provides insights into the thermal behavior of stretchable electronics subject to combined electrical current flow and mechanical stretching, with applications in wearable electronics and soft robotics in mind.
20 October 2025 in ACS Energy Letters