10 March 2021 in Geofluids
The Taiyuan Formation limestone aquifer and Ordovician limestone aquifer are widely distributed in the coal seam floor of coal measures in North China; the water hazard safety problem of the stope floor under the influence of mining is very prominent. The risk of the water inrush from the coal seam floor is closely related to the degree of full exploitation, so it is necessary to study the stability of the stope floor under aquifer conditions, especially the influence of the working face length effect on floor stability. Through numerical simulation of water-rock coupling action, the mine pressure behaviors of the water-resisting floor under different face lengths were analyzed based on the measured formation permeability coefficient. The Fish program was used to adjust rocks entering the plastic failure state into a strain softening model to investigate the influence of the face length effect, the damage degree of the water-resisting floor, and the morphology and deformation bearing capacity of the failure zone. The results show the following: (1) the face length effect is one of the main influence factors of the failure mode and failure degree of surrounding rocks in the stope; (2) as the face length increases, the obvious pressure relief zone of surrounding rocks presents a staged change, and the obvious pressure relief zone at the seam roof and floor is in an obvious “reverse saddle shape”; (3) the closer to the seam floor, the more remarkable the rock softening characteristic because of the compaction action of gangues caving from the roof; and (4) the rock mass close to the seam floor undergoes local tensile failure, and the water-resisting floor near the coal wall at two sides mainly bears compaction-shear action, leading to compression-shear failure of the rock mass at the floor and formation of water-conducting fractures. The study results can provide a reference for taking precautionary measures of safety mining above a confined aquifer.
18 June 2021 in Geofluids
Coal and gas outburst is still a major safety problem in the process of coal production in China. Correctly understanding of the migration law of outburst high gas and pulverized coal is an important basis for accurately predicting the occurrence time and possible scope of outburst. To reveal the airflow disturbance characteristics and coal-gas flow rule in coal and gas outburst process, outburst coal-gas migration simulations under different gas pressures were conducted using a self-developed visual outburst dynamic effect test device. The results showed that coal-gas flow state at the outburst port is divided into subcritical flow, critical flow, and supercritical flow state. The pulverized coal-gas flow migration in the roadway space can be divided into coal gas two-phase flow area, air compression area, and undisturbed area. Under the experimental conditions, the maximum propagation velocities of wave are 342.22~359.21 m/s, and the coal gas two-phase flow is far less than the propagation velocities of outburst wave, just 3.68~33.33 m/s. When the outburst energy is large, multiple compression waves can superimpose to form shock waves. The peak value of the wave does not necessarily appear in the first boosting range. The presence of pulverized coal leads to a faster attenuation of shock wave, but it makes a greater dynamic destructive force at the same speed.
24 February 2021 in Geofluids
Gas outburst is an important issue in deep coal mining. At present, the gas-rock coupling change mechanism and intensity prediction of gas outburst are not clear. The research of gas outburst simulation experiment is particularly important. The State Key Laboratory of Gas Disaster Monitoring and Emergency Technology of China independently developed a large-scale coal and gas outburst physical simulation test system. However, the influence of the design parameters of the testing machine on the stability and accuracy of the simulation experiment is unclear. The article analyzes the energy conversion in the process of gas outburst through experimental simulation phenomena and results. The experimental simulation results show that the energy released by the CO2 gas in similar materials is the most important energy source. The cracks of similar materials increase the nominal volume of similar materials, and the deformation energy stored in similar materials slightly increases. The experimental simulation results are consistent with the actual situation on site. Combined with CAE simulation analysis, the displacement and pressure of the indenter of the experimental machine remained basically unchanged during the experiment, and the system did not produce resonance. Comprehensive analysis shows that the design of the test machine meets the simulation requirements.