Jiangxi Province Key Laboratory of Environmental Geotechnical Engineering and Hazards Control, Jiangxi University of Science and Technology, Ganzhou 341000, China
Auto-generated profile, based on publicly available information
Tong-Fa Deng
Jiangxi Province Key Laboratory of Environmental Geotechnical Engineering and Hazards Control, Jiangxi University of Science and Technology, Ganzhou 341000, China
Using dimensional analysis, the dimensional equations for the estimation of soil properties after dynamic compaction (DC) in loess ground are established. Based on these equations and field data obtained from previous practices of DC, the equations are fitted relating soil properties after DC with construction parameters, soil properties before tamping, and even with the surficial deformation during tamping. Finally, the equations are verified by several project examples, and the results indicate that the calculated results agree well with the field measured results. These equations provide a practical way for the prediction of the soil properties after DC for loess.
The mechanism of the time effect on pile capacity can be interpreted as thixotropic recovery and soil consolidation around the pile. Based on the final installation or jacking force and subsequent reload or re-jacking force, the final load capacity of the pile can be estimated. A parametric inversion was conducted to determine the increasing load capacity curve of the jacked pile, which can be used to estimate the increasing load capacity curve of other piles installed in the same subsurface conditions. The results of this paper are instructive and constructive to the design and construction of jacked piles.
Eigen-frequency, compared with mode shape and damping, is a more practical and reliable dynamic feature to portray structural damage. The frequency contour-line method relying on this feature is a representative method to identify damage in beam-type structures. Although this method has been increasingly applied in the area of damage identification, it has two significant deficiencies: inefficiency in establishing the eigen-frequency panorama; and incompetence to identify cracks in noisy conditions, considerably impairing the effectiveness in identifying structural damage. To overcome these deficiencies, a novel method, termed the frequency contour-strip method, is developed for the first time. This method is derived by extending the frequency contour line of 1D to frequency contour strip of 2D. The advantages of the frequency contour-strip method are twofold: (i) it uses the isosurface function to instantly produce the eigen-frequency panorama with a computational efficiency several orders of magnitude higher than that of the frequency contour-line method; and (ii) it can accommodate the effect of random noise on damage identification, thereby thoroughly overcoming the deficiencies of the frequency contour-line method. With these merits, the frequency contour-strip method can characterize damage in beam-type structures with more efficiency, greater accuracy, and stronger robustness against noise. The proof of concept of the proposed method is performed on an analytical model of a Timoshenko beam bearing a crack and the effectiveness of the method is experimentally validated via crack identification in a steel beam.