Sihai Luo

Sihai Luo

Auto-generated profile, based on publicly available information

Sihai Luo

School of Civil and Surveying & Mapping Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 November 2023 in Minerals
Verified
Journal Article
Open access
PDF file
YHYing Huang
Ying Huang
PLPing Long
Ping Long
GWGuanshi Wang
Guanshi Wang
SLSihai Luo
Sihai Luo
YSYonghui Shi
Yonghui Shi
XLXiongdong Lan
Xiongdong Lan
Clay minerals have a specific adsorption capability for anions, which increases the amount of net negative charge on the surface, leading to the increased adsorption of rare-earth ions in clay minerals and some change from exchangeable to non-exchangeable. Further, anions show a shielding effect on rare-earth ions. The shielding capacity of anions in the leaching agents for rare-earth ions was measured in this study. The relationship between the solid-phase concentration of rare-earth ions shielded and the anion concentration was consistent with the Langmuir model. Based on the Kerr model describing the exchange of rare-earth ions by ammonium ions, an ion-exchange model considering the shielding influence of anions was proposed. The accuracy of the proposed model was higher than that of the Kerr model. When the leaching agent was ammonium sulfate, the calculation accuracy of XW and AY samples was increased by 1.15% and 5.75%, respectively. The improvement in accuracy positively correlated with the proportion of iron oxides, aluminium oxides, and Kaolin. The established ion-exchange model can provide accurate source and sink terms for the numerical simulation of the leaching process of ion-adsorption-type rare-earth ores.

2 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JLJian Liu
Jian Liu
XLXiongdong Lan
Xiongdong Lan
GWGuanshi Wang
Guanshi Wang
SLSihai Luo
Sihai Luo
ZYZhipeng Yang
Zhipeng Yang
In the in situ leaching process of ionic rare earth ore, high-pressure moving water jet technology has been applied to improve floor leakage problems. However, it has been found that the morphology of the erosion surface formed by a moving water jet cannot be accurately predicted. The range of the erosion surface has an important influence on the stability of liquid collection engineering and the liquid collection rate of rare earth resources, which is an important basis for the design of liquid collection engineering. To study this, soil-breaking tests using high-pressure moving water jets for a Pingnan mine were conducted. The influences of jet pressure and nozzle moving speed on soil-breaking morphology were analysed. The mechanism of erosion surface formation was revealed by erosion theory, and a method of predicting the erosion surface geometry based on jet pressure and nozzle speed is proposed. The results show that, in the jet pressure range of 5~10 MPa, with increases in jet pressure and decreases in nozzle speed, the geometric shape of the erosion surface tends to expand, and these parameters have no effect on the morphological characteristics of the erosion surface. In the soil-breaking process, the erosion speed decreases with increases in jet distance. As the nozzle speed becomes greater, the degree of the attenuation of erosion speed at a given jet pressure also becomes greater. Soil-breaking depth has a quadratic relationship with jet pressure and a 0.5 power function relationship with nozzle speed. The geometry of the erosion surface has self-similarity and can be divided into straight and curved sections. Accordingly, an empirical formula of the erosion surface geometric shape is proposed. The error of predicting the soil-breaking depth is less than 11%, which can provide a reference for engineering applications.

25 January 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
YGYong Gui
Yong Gui
NLNana Li
Nana Li
SLSihai Luo
Sihai Luo
GWGuanshi Wang
Guanshi Wang
Without a reliable design method for the leaching and seepage step of in situ leaching (ISL), problems such as low comprehensive resource recovery rate and frequent geological disasters such as landslides are prominent. This study established a simplified “liquid injection-collection” plane model of ISL with a linear barefoot type rare earth mine as the research object. The steady seepage line equation was derived based on groundwater dynamics and the Dupuit assumption. Then, engineering verification and calculation error analysis were performed. The seepage line equation is expressed as a piecewise function, where the seepage line in the liquid injection area is the upper half of the ellipse line, and the one in the non-liquid injection area is a parabola. The calculation error increases along the flow field direction. The seepage gradient, bedrock gradient, liquid injection range, and relative permeability coefficient have limited influence on the calculation error of the equation. The seepage line equation can be fairly applied in ISL. The seepage line equation can provide a theoretical basis for the “prior prediction (design)” of the “liquid injection/collection” leaching and seepage process in ISL.

6 January 2023 in Minerals
Verified
Journal Article
Open access
PDF file
YHYing Huang
Ying Huang
PLPing Long
Ping Long
GWGuanshi Wang
Guanshi Wang
SLSihai Luo
Sihai Luo
Ion-adsorption-type rare-earth ores (IATREOs) that have experienced granite weathering have good permeability, and their leaching process involves the solute transport problem, which is dominated by convection. Because of the oscillation and dispersion errors of existing numerical methods for solving the convective-dominated solute transport equation, the results have low precision in the twin leaching process. In this paper, the convection–dispersion equation is decoupled into the dispersion equation, the convection equation, and the source-sink equation; the Crank–Nicolson and implicit difference methods are used to solve the dispersion equation and the source-sink equation, respectively. The solution of the convection equation is achieved on the basis of its physical interpretation. Therefore, a decoupling method for the convective-dominated solute transport equation is established. In comparison to the two examples with analytical solutions, the calculation errors of the method established in this paper are less than 2.00%, and it can solve the oscillation and dispersion problems. The rationality of the method is further demonstrated through the column leaching experiment of IATREOs. In comparison to the test results, the coefficients of determination of the breakthrough curves of rare-earth ions and ammonium ions calculated by the proposed method are all greater than 0.850, and the peak concentration error of rare-earth ions is less than 7.00%. This indicates that the proposed method can simulate the leaching process well. Furthermore, by combining the multiple/half method and the dichotomy method, an optimization method for determining the leaching agent amount was established to analyze the relationship between the leaching agent and the ratio of dispersion to pillar length. The results can provide a solution that can be used to mine IATREOs from experience to theory.

4 March 2013
Verified
Conference Paper
Closed access
SLSi-Hai Luo
Si-Hai Luo
YWYang Wang
Yang Wang
XPXiao-Qing Pang
Xiao-Qing Pang
TDTong-Fa Deng
Tong-Fa Deng
Using dimensional analysis, the dimensional equations for the estimation of soil properties after dynamic compaction (DC) in loess ground are established. Based on these equations and field data obtained from previous practices of DC, the equations are fitted relating soil properties after DC with construction parameters, soil properties before tamping, and even with the surficial deformation during tamping. Finally, the equations are verified by several project examples, and the results indicate that the calculated results agree well with the field measured results. These equations provide a practical way for the prediction of the soil properties after DC for loess.

4 March 2013
Verified
Conference Paper
Closed access
BHBoachan Huang
Boachan Huang
BBBenjamin F. Bowers
Benjamin F. Bowers
GMGuo-Xiong Mei
Guo-Xiong Mei
SLSi-Hai Luo
Si-Hai Luo
ZZZhongjie Zhang
Zhongjie Zhang
Front matter pages come before the papers or chapters in a published work. Front matter includes the title page, copyright and notices page, and table of contents. It can also include a foreword, preface, or introduction; series information; lists of contributors, sponsors or reviewers; lists of abbreviations and notations; and conversion tables.