Ammonium sulfate (AS) and ammonium nitrate (AN) are key components of urban fine particles. Both field and model studies showed that heterogeneous reactions of SO2, NO2, and NH3 on wet aerosols accelerated the haze formation in northern China. However, little is known on phase transitions of AS‐AN containing haze particles. Here hygroscopic properties of laboratory‐generated AS‐AN particles and individual particles collected during haze events in an urban site were investigated using an individual particle hygroscopicity system. AS‐AN particles showed a two‐stage deliquescence at mutual deliquescence relative humidity (MDRH) and full deliquescence relative humidity (DRH) and three physical states: solid before MDRH, solid‐aqueous between MDRH and DRH, and aqueous after DRH. During hydration, urban haze particles displayed a solid core and aqueous shell at RH = 60–80% and aqueous phase at RH > 80%. Most particles were in aqueous phase at RH > 50% during dehydration. Our results show that AS content in individual particles determines their DRH and AN content determines their MDRH. AN content increase can reduce MDRH, which indicates occurrence of aqueous shell at lower RH. The humidity‐dependent phase transitions of nitrate‐abundant urban particles are important to provide reactive surfaces of secondary aerosol formation in the polluted air.
Black carbon (BC) strongly absorbs solar radiation, contributing to global warming. Absorption enhancement of BC particles is difficult to quantify due to an inadequate representation of their complex morphology and mixing structures, as well as interaction with radiation. Here, we apply a 3D method accounting for detailed BC mixing structures to predict the absorption enhancement of individual BC particles (Eabs) and the total BC particle population (Eabs, bulk). The diverse range of mixing structures in individual BC particles leads to variable Eabs that could hardly be predicted by empirical approximations. We find that the volume proportion of the BC embedded in coating (F) determines Eabs when the particle to BC core diameter ratio (Dp/Dc) is larger than 2.0. Our findings reveal the potential mechanism behind the differences in observed and modeled Eabs, bulk. The framework builds a bridge connecting the microscopic mixing structure of individual BC particle with Eabs, bulk.
Morphology, composition, and mixing state of individual particles emitted from crop residue, wood, and solid waste combustion in a residential stove were analyzed using transmission electron microscopy (TEM). Our study showed that particles from crop residue and apple wood combustion were mainly organic matter (OM) in smoldering phase, whereas soot-OM internally mixed with K in flaming phase. Wild grass combustion in flaming phase released some Cl-rich-OM/soot particles and cardboard combustion released OM and S-rich particles. Interestingly, particles from hardwood (pear wood and bamboo) and softwood (cypress and pine wood) combustion were mainly soot and OM in the flaming phase, respectively. The combustion of foam boxes, rubber tires, and plastic bottles/bags in the flaming phase released large amounts of soot internally mixed with a small amount of OM, whereas the combustion of printed circuit boards and copper-core cables emitted large amounts of OM with Br-rich inclusions. In addition, the printed circuit board combustion released toxic metals containing Pb, Zn, Sn, and Sb. The results are important to document properties of primary particles from combustion sources, which can be used to trace the sources of ambient particles and to know their potential impacts in human health and radiative forcing in the air.