5 August 2021 in Journal of Lightwave Technology
The monitoring of ionizing radiation is critical for the safe operation of nuclear and other high-power plants. Fiber-optic sensing of radiation has been pursued for over 45 years. Most protocols rely on radiation effects on the optical properties of the fiber. Here we propose a new concept, in which the opto-mechanics of standard fibers coated by thin layers of fluoroacrylate polymer are observed instead. The time-of-flight of radial acoustic waves through the coating is evaluated by forward stimulated Brillouin scattering measurements. The time-of-flight is seen to decrease monotonically with the overall dosage of gamma radiation from a cobalt source. Variations reach 15% of the initial value for 180 Mrad dose and remain stable for at least several weeks following exposure. The faster times-of-flight are consistent with a radiation-induced increase in the coating stiffness, observed in offline analysis. The effects on the coating are independent of possible changes in the optical parameters of the fiber. The combination of opto-mechanical analysis together with established fiber sensing protocols may help disambiguate the evaluation of multiple radiation metrics and reduce environmental cross-sensitivities. The technique is suitable for online monitoring and may be extended to spatially distributed measurements.
27 January 2016 in Journal of Thermal Analysis and Calorimetry
16 March 2020 in Journal of Lightwave Technology
To mimic extreme downhole application conditions, a series of optical fibers was aged in crude oil at a pressure of 2000 psi and temperatures of 100 - 300°C. The fibers under investigation used various coatings, including dual and single acrylate, silicone/acrylate, carbon/acrylate, silsesquioxane-type hybrid, polyimide, carbon/polyimide, acrylate/PFA and polyimide/PFA. Interactions with crude oil led to swelling, delamination and dissolution of some of the coatings, which ultimately resulted in reduction of mechanical strength of the fibers. For different coating types, the temperatures were determined above which a significant strength degradation was observed. Carbon/polyimide, acrylate/PFA and polyimide/PFA coatings were found to be the most oil-resistant. The amount of hydrogen generated by crude oil was evaluated from the attenuation spectra collected from the immersed fibers. For this analysis, two fibers (one doped with germanium and the other with germanium and phosphorus) were utilized as sensors. Using this approach, it was possible to estimate the amount of hydrogen generated by crude oil at different temperatures.
29 August 2020 in Journal of Thermal Analysis and Calorimetry
12 July 2024 in Journal of Coatings Technology and Research
13 July 2022 in Journal of Lightwave Technology
Optical fibers are widely used in gel-filled and Fiber-In-Metal Tube (FIMT) cables. Cable gels are believed to protect optical fibers from interactions with moisture and oxygen, while their hydrogen scavenging components reduce the hydrogen ingression in the fiber. However, if used at elevated temperatures, the gel environment may lead to the fiber coating swelling, partial dissolution, and other types of degradation. Furthermore, at high temperatures cable gels may themselves become sources of hydrogen generation. For studying potential favorable and adverse effects of cable gels, a series of optical fibers was aged in a hydrogen scavenging gel (HSG) at a pressure of 500 psi and temperatures of 50 – 300 °C. The fibers under investigation used various coatings, including dual and single acrylate, silicone/acrylate, carbon/acrylate, silsesquioxane-type hybrid, polyimide, carbon/polyimide, acrylate/PFA and polyimide/PFA. Residual coating diameter and mechanical strength of the fibers were used as an indicator of the gel influence. Effects of HSG on hydrogen ingression were evaluated from the attenuation spectra of the immersed fibers. In separate experiments, the cable gel and the fiber coatings were investigated as potential sources of hydrogen.