Part load ratio is often observed in real operations of airport terminal cooling system. This phenomenon is more obvious during the COVID-19 pandemic, as sudden flight restrictions impacting cooling demand are widely adopted in hub airport terminals. This research aims to propose optimal strategies of multi-chiller in airport terminals based on cooling load characteristics modeling, to tackle the aforementioned issues. Numerical experiments based on a real-world Chinese airport terminal are conducted to validate the proposed method. The results show that an average cooling load drop of 30% is observed from scenario of normal flight before COVID-19 to scenario of COVID-19 Period flight, and the average cooling load drop reaches to 44% from scenario of busy flight before COVID-19 to scenario of COVID-19 Period flight. The results also reflect that cooling load presents synchronous trend with passenger flow, but presents asynchronous trend with outdoor temperature. The influence of outdoor temperature on cooling demand delays due to building envelops. It indicates that simple superimposition according to passenger flow change for chiller operation number is reliable, efficient and effective, but is not suitable for outdoor temperature change. The findings are helpful to develop optimal strategies for further real-time control of multi-chiller.
18 August 2025 in Separation and Purification Technology
Ceramic industry accounts for considerable amount of NOx emission of industrial sources in China. With stricter air protection act imposed by the Chinese government, many ceramic plants have to install deNOx devices. Among all the de-NOx technologies, selective non-catalytic reduction (SNCR) is barely used in the NOx burning area process-control. In this study, a number of first-hand data focusing on burning area NOx control by using SNCR technology of ceramic roller-hearth kiln were shared, the spraying rate, temperature range, the quantity and arrangement mode of spray guns were studied.Besides, a continuous experiment was carried out. When the spraying rate was 60 L/min, the temperature range was 900-950 °C, and two spray guns were used and arranged as opposite spraying mode, the NOx concentration after purification kept below 25 mg/m3, the removal efficiency was steadily higher than 40% with the average about 50%, and the ammonia escape met relevanttechnical specification.
1 July 2020 in IOP Conference Series: Earth and Environmental Science
Selective non-catalytic reduction (SNCR) is a denitration method used in NOx process-control of ceramic kiln. In this study, the effect of combustion gas components (CO, H2, CH4) on NOx removal in the SNCR process was investigated, using ammonia and urea as reducing agent in a lab-scale experimental platform. The results showed that the addition of CO slightly promoted the NOx removal efficiency when ammonia was used as reducing agent, while when urea was used as reducing agent, the addition of CO inhibited the denitrification. The increase of H2 and CH4 addition ratio in the simulated flue gas reduced the de-NOx efficiency. With the same addition ratio, the effect of CH4 on the reduction of denitration efficiency was much more obvious than that of H2. When ammonia was used as reducing agent, the ammonia escape was much greater than that of urea.