22 September 2020 in Mathematical Problems in Engineering
To locate the fault location accurately and solve the problem quickly is the key to improve the power supply capacity of power grid. This paper presents a fault location method based on SVM fault branch selection algorithm and similarity matching. Firstly, an SVM-based fault branch filter classifier was constructed based on the positive sequence component feature matrix data of each monitoring point, which can accurately select the branch where the current fault is located. Then, based on the positive sequence voltage distribution characteristics, the Euclidean distance and Pearson correlation coefficient (PCC) are used to establish the similarity objective function of fault location. And then, the fault is accurately located by the objective function. Finally, the proposed method is validated by using an IEEE-14 node network. The results show that the proposed method is effective and accurate.
2 March 2026 in IEEE Transactions on Power Electronics
The dual active bridge (DAB) converter holds significant promise for future power systems. Medium-frequency transformer (MFT) is a key component in a DAB converter, influencing the power density and efficiency, so the material selection, structure design and parameter optimization are essential. Uncut nanocrystalline cores are ideal for high-power MFT because of high efficiency, but a lack of detailed structural designs considering magnetic integration has resulted in limited power density. For parameter optimization, traditional method ignores the error between the actual and target turns ratio caused by the integral turns number, which will influence the converter performance. Moreover, the high dimensionality of both decision variables and optimization objectives leads to high computational complexity. In this article, a design and multiobjective optimization method of an uncut nanocrystalline core MFT for DAB converters are provided. The given MFT structure with a 3D printed bobbin, considering multiphysics issues, can achieve high power density and high efficiency. Magnetic core dimensions and dc current density are considered as decision variables of the optimization problem. The proposed optimization algorithm can obtain more reasonable results, reduce computation time, and enhance solution quality. Designs with custom and standard core dimensions using the brute force algorithm and nondominated sorting genetic algorithm II are compared. The proposed structure and optimization algorithm are verified by a 50 kW uncut nanocrystalline core based MFT prototype for a DAB converter, achieving an efficiency of 99.69% and a power density of 16.4 kW/L.
5 November 2025 in IEEE Transactions on Industrial Electronics
The growing demand for high-power-density and high-efficiency power converters has stimulated a strong interest in soft-switching techniques. However, conventional zero-voltage switching (ZVS) methods based on variable switching frequency control suffer from an excessively wide switching frequency range and large current ripple. To solve this problem, this paper proposes a carrier-based phase-shift modulation scheme with a low calculation burden for parallel silicon carbide (SiC) converters to achieve full range zero-voltage switching (ZVS). A dynamically adjustable phase-shift angle is applied to a pair of new carriers in each carrier cycle, generating a sufficiently large circulating current flowing through the parallel half-bridge (HB) legs to enable all SiC MOSFETs to achieve ZVS operation. As the HB currents are reshaped into a quadrilateral waveform, this operation mode is referred as quadrilateral current mode (QCM). First, a pair of new carriers satisfying the operational requirements of QCM is constructed. Subsequently, the corresponding phase-shift angle is precisely calculated and dynamically updated to create ZVS conditions. Finally, experimental results are provided to validate the advantages of the proposed method in switching loss reduction and efficiency improvement.