Simple, accurate, portable, and selective gas sensors with autonomous, remote, and real-time access have become a requisite in various fields of applications. In this article, we report the development of a stand-alone and selective gas sensor system incorporating a single resistive sensor with wireless monitoring and Internet connectivity. The sensor is fabricated in-house with platinum-decorated tin-oxide hollow spheres as the sensing material, which exhibits a prominent response toward the tested volatile organic compounds (VOCs) at different concentrations. The intelligence in terms of accurate identification of VOCs and their concentration is attained by employing a machine learning tool based on a deep neural network. The applied model displays an average accuracy of 96.43% with a fast prediction speed of $310~\mu \text{s}$ , allowing a real-time recognition capability. The wireless connectivity is established utilizing a low-power microcontroller board and a Bluetooth module. The real-time data is made available for the users over an Android-based mobile application and a webpage while utilizing cloud services through the Internet. The implemented system is successfully experimented with and validated under different test conditions that verify the whole platform. Further, the sensor system can be potentially applied to a remote application without needing any manual involvement. The demonstrated work with an Internet of Things (IoT) paradigm strengthens the next-generation gas sensing technology for developing smart, selective, and real-time gas sensor systems.
24 October 2017 in IEEE Transactions on Nanotechnology
In this paper, ppb level methanol sensing by a hybrid gas sensor device based on reduced graphene oxide (rGO) and TiO2 nanotubes is reported. Tuning of carbon to oxygen ratio, in rGO layers, was found to be very effective in modulating the sensor response. The C:O ratio was tuned by varying the voltage (11–31 V) during the electro-deposition of rGO (on top of the TiO2 nanotube matrix) and was confirmed by Raman spectroscopy and X-ray photoelectron spectroscopy. Due to variations in the C:O ratio in rGO, the barrier height of rGO-TiO2 nanotube junctions and etch hole dimension on rGO layer were varied. Judicious optimization of these two pivotal parameters resulted in the sensor device (for rGO deposition voltage of 16 V), capable of detecting ppb level (up to 62 ppb) methanol efficiently. The sensor showed ∼16%, ∼59%, and ∼94% response magnitude for 62 ppb, 1 ppm, and 200 ppm concentrations, respectively. A comprehensive discussion elucidating the role of rGO-TiO2 NTs junctions (with a tunable C:O ratio) has also been presented correlating the experimental findings.
4 August 2020 in IEEE Transactions on Electron Devices
This article reports the insights of reduced graphene oxide (RGO) wrapped tin oxide (SnO₂)-based room temperature (RT) formaldehyde (HCHO) sensor using experimental and theoretical approaches. SnO₂ hollow spheres are primarily responsible for large changes in conductivity due to HCHO adsorption, while RGO layer facilitates in RT detection of these conductometric changes. Sensing measurement data revealed that composite material offers almost 24 times larger response than that of bare RGO with 200 ppm of HCHO. Density functional theory (DFT)-based first principle study has also been carried out to explore the surface interactions between HCHO and composite material for a better understanding of the sensing mechanism. The quantum simulation results suggest that the additional electron transfer originated from the oxidative decomposition of adsorbed HCHO into formate (HCOO⁻) species is the crucial factor for getting such improved response behavior. Theoretical findings are in good support with the experimental observations. The work has been expected to carry immense significance for paving the way of realizing a simple, low power, and low cost HCHO sensor device suitable for indoor applications.
The letter reports flower-like SnO 2 nanostructure-based chemiresistive type formaldehyde sensor to detect formalin adulteration in fish. A low-temperature hydrothermal technique was adopted to prepare the sensing material. The structural and morphological characterizations of the synthesized material were performed using X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM), respectively. Using a micropipette, the sensing material was drop casted over interdigitated electrodes built on an alumina substrate to fabricate the sensor device. The gas sensing study showed that the sensor was notably sensitive toward formaldehyde. The theoretical limit of detection of the sensor was found to be 870 ppb. The sensing behavior was studied towards the fish emitted vapors where the sensor offered significant distinction among the fresh and adulterated fish samples.
The paper reports the temperature-dependent selective detection property of plate-like tungsten oxide (WO 3 ) toward toluene and isopropanol. A low-temperature operated hydrothermal method was utilized to synthesize the sensing material. An X-ray diffraction technique and refinement study confirms the monoclinic crystal structure and a field emission scanning electron microscope reveals the plate-like hierarchical morphology of the synthesized material. The fabricated sensor was exposed to different volatile organic compounds (acetone, ethanol, toluene, isopropanol, ammonia) in the temperature range of 150 °C - 300 °C. The sensor exhibited a temperature-tunable dual selectivity toward toluene at 200 °C and isopropanol at 250 °C. The sensor’s responses in the presence of 500 ppm of toluene and isopropanol at their optimum operating temperature were 10 (at 200 °C) and 12 (250 °C), respectively. Response and recovery times of the sensor for 500 ppm of analytes are around 200 s and 300 s, respectively. Long term stability of the sensor was investigated over 30 days. By adjusting the working temperature of the sensor device, the proposed sensor can detect toluene and isopropanol selectively in an indoor environment.