14 June 2021 in ACS Sensors
24 October 2016 in Nanotechnology
WS 2 nanosheets have been synthesized by ultrasonication in a binary mixture of acetone and 2-propanol, with a volume ratio of 80:20. Hansen solubility parameters were taken into consideration as part of the process. These nanosheets have been characterized by electron microscopy, atomic force microscopy, and x-ray diffraction, along with spectroscopy such as ultraviolet-visible spectroscopy, Raman spectroscopy, and x-ray photoelectron spectroscopy. The nanosheets were further used as a sensing material to fabricate a humidity sensor on interdigitated aluminum electrodes, realized over Si/SiO 2 substrate using a conventional photolithography technique. The response for our sensor varied from 11.9 for 40% RH to as high as 37.5 for 80% RH. Response and recovery time were found to be 13 ± 2 s and 17 ± 2 s respectively. The suspended nanosheets were also treated with UV light in a nitrogen environment. The response for UV treated nanosheets shows better linearity, however its response decreases in the presence of humidity. This is due to a decrease in oxygen content of the UV treated sample. Furthermore, the effect of sonication time has been investigated, and it was found that samples with 10 h sonication are better than others due to their high surface-to-volume ratio. The repeatability and stability of the sensor have been investigated and found to be excellent. The hysteresis in the sensors was also explored. The mechanism of humidity sensing has been discussed in detail.
26 May 2016 in RSC Advances
This paper reports the development of MoS2/GO nanocomposite based sensing layers for resistive humidity sensors.
1 October 2020 in Sensors and Actuators B: Chemical
8 July 2019 in IEEE Transactions on Electron Devices
The growth of industries and other human activities have led to ever increasing amounts of pollutants in both outdoor and indoor spaces. These pollutants have hazardous effects on humans and the wider ecology. Hence, air quality monitoring (AQM) is essential and involves the robust monitoring of various toxic gases and volatile organic compounds (VOCs)—in case, the concentration of any pollutant exceeds the safe limit in a given location. This paper describes the different sources of indoor and outdoor pollutants, reviews the current status of gas sensors, and discusses the role of new two dimensional (2-D) materials in detecting these hazardous gases at low power, i.e., close to the ambient temperature. Here, we review different synthesis techniques of 2-D materials and discuss the sensing performances of pristine and functionalized nanomaterials for some of the important pollutants such as NO x , NH 3 , SO x , CO, formaldehyde, toluene, and so on. The review concludes with some proposed methods to help in reducing air pollution today.
8 September 2021 in ACS Sensors