Epoxy resin is a thermosetting polymer with excellent performance and wide application. However, it suffers from low toughness and high brittleness because of its high crosslink density. To overcome these disadvantages, this study synthesizes a toughened, flexible, and hydrophobic epoxy resin (DGEBDBP) by introducing a flexible segment into the polymer network via a thiol‐ene click reaction. The cured flexible epoxy resin is obtained by mixing E44, DGEBDBP, and polyamide curing agents of varying contents. The long alkyl side chains significantly improve the mechanical properties and hydrophobicity of the cured epoxy resin. The sample containing 75% DGEBDBP and 25% E44 achieve the highest breaking elongation that was nine times that of pure E44, the highest compressive strength of 112.8 MPa, and the highest contact angle of 101.4°. The introduction of side chains through the thiol‐ene click reaction can provide a simple and effective method for designing and preparing multifunctional epoxy resins.
Polysiloxane foam (PSF) is a foam material with outstanding performance. However, the limiting oxygen index (LOI) of pure PSF is only 22.0 vol%, which can be attributed to combustible materials. In this work, graphene oxide (GO) was functionalized with hexachlorocyclotriphosphazene (HCCP) and 3-aminopropyltriethoxy-silane (APTS). The introduction of the functionalized GO into the PSF matrix has significantly improved the dispersion and flame-retardant properties of the final PSF composite. The char residue of PSF with 1.0 wt% functionalized GO content is 43.04%, which is considerably higher than that of the pure PSF (23.18%). Furthermore, the Tmax of PSF with 5.0 wt% functionalized GO content has increased from 585.9 °C to 668.8 °C. The results of the cone calorimetry test indicate that modification with functionalized GO prolongs the combustion of PSF composites. The LOI value of PSF with 5.0 wt% functionalized GO content has increased from 22.0% to 27.6%. In addition, the peak heat release rate, total heat release, and total smoke production of PSF with 5.0 wt% functionalized GO content were decreased by 49.2%, 14.5%, and 62.2% relative to those of pure PSF. These results can be ascribed to the barrier effect of GO, the condensed-phase and gas-phase mechanisms of HCCP, and the bonding effect of APTS.
Peptide-containing hydrogels have become a research hotspot due to their unique secondary structure and biocompatibility. Herein, we used amino-terminated F127 as a macroinitiator to initiate the ring-opening polymerization of L-lysine(z)-NCA, and the obtained oligo(lysine)-modified F127 (FL) had degrees of polymerization of lysine of 2, 5, and 8. The results showed that the FL hydrogels had reversible temperature-dependent sol–gel transitions, and the introduction of lysine increased the critical gel temperature. In the dilute solution of FL, the micelle size increased and aggregated as the pH increased; the micelle grew into a rod-like shape under alkaline conditions. Scanning electron micrographs showed that the interior of the FL hydrogel had a more complete porous structure. The FL-2 hydrogel loaded with 5-fluorouracil exhibited an approximately linear release trend within 12 h and has good biocompatibility. Therefore, FL hydrogels have potential applications in the field of biomedicine.
Graphene oxide doped oligo(lysine)-modified F127 to prepare a series of FLGO hydrogels, which are thermally induced, mechanically enhanced and injectable, and have drug release properties that can be adjusted by pH.