1 December 2021 in Mining of Mineral Deposits
Purpose. Assessing the process of damaging factors formation during the coal aerosol explosion in mine workings on the basis of theoretical research of the explosion of coal dust deposits in order to substantiate promising methods of protecting miners from their impact. Methods. An integrated approach is used, which includes a critical analysis of literature data on the occurrence and development of coal aerosol explosions in mine workings; theoretical research into the state of the gaseous medium at the characteristic points of the development diagram of the coal dust deposits explosion as a result of mining operations based on the laws of classical physics and chemistry. Findings. The main aspects of the explosion mechanism of dust in a powdery state, accumulated on the surfaces along the mine working perimeter, and the formation of such negative factors as the effect of gaseous medium accelerated movement, have been revealed; high temperature formed during coal and methane detonative combustion; increased gas pressure. The revealed aspects of the dust explosion mechanism make it possible to determine the main directions for protection of miners caught in the explosion. The diagram of the development of settled coal dust explosion along the mine working with normal ventilation conditions, taking into account the influence of seismic waves, has been improved. Originality. Analytical dependences, reflecting the value of gas energy at characteristic points of the diagram, have been determined, and the dynamics of the formation of negative factors caused by the explosion have been revealed. Practical implications. Possible ways of protecting miners from the impact of negative factors caused by the coal aerosol explosion and reducing the severe consequences of such accidents are proposed.
1 May 2022 in Ecological Engineering & Environmental Technology
The article is devoted to substantiation of parameters of water body aeration technology at high, as well as low, air temperatures. As a result of studies, the design of the water aerator based on a two-stage airlift has been improved. A study of its physical model has been conducted. The cost...
1 January 2020 in Naukovyi visnyk Donetskoho natsionalnoho tekhnichnoho universytetu
SUState Higher Educational Institution «Donetsk National Technical University»
State Higher Educational Institution «Donetsk National Technical University»
OEOdessa Research Institute of Forensic Examinations
Odessa Research Institute of Forensic Examinations
+2
15 June 2021 in Series of Geology and Technical Sciences
The aim of the paper is to identify the qualitative and quantitative parameters of seismic waves and accelerations on the mine working contour after an explosion of the gas-and-dust mixture. Information about the formation of seismic waves in the rock mass accommodating the mine working was received using modelling in order to improve the means of containment of explosion of further developed dust-air mixture. The parameters of seismic waves, such as propagation velocity and acceleration, amplitude, and frequency of oscillations of mine working walls, were established for the conditions of the experimental structure, which allows to scientifically substantiating the design parameters of the systems protecting the miners against explosion. The energy of the explosion propagates in the rock mass in the form of a series of peak-like pulses and oscillations with smaller amplitude. Modulus of acceleration is an informational indicator, which suits the most for registration by seismic sensors responding, specifically, to the most powerful peak pulses formed by seismic waves. By revealing the qualitative and quantitative indicators of seismic wave propagation on the mine working contour and in the rock mass, the parameters of seismic sensors of the systems protecting the miners against explosion can be substantiated.
1 January 2021 in Expert Paradigm of Law and Public Administration
1 January 2021 in JOURNAL of Donetsk mining institute
SUState Higher Educational Institution «Donetsk National Technical University»
State Higher Educational Institution «Donetsk National Technical University»
Purpose. Improving the design of coal dust explosion localization devices to increase their speed, premature creation of an effective barrier from the cloud of extinguishing agent by reliable suppression of the fire front and, as a consequence, stop the spread of explosion on the mine, which will increase personnel protection from negative explosion factors. Methods. A comprehensive approach was used, which includes analysis and generalization of statistical data on explosions of methane-air and dust-air mixtures in mines of Ukraine, critical analysis of means for localization of coal dust explosions, computer modeling of rock deformations during the explosion. Results. The obtained data on the redistribution of explosion energy in the mountain massif allowed to scientifically substantiate a qualitatively new approach to obtaining information about the approach of the shock front. The results of the study confirmed that the loosening of dust accumulations under the influence of seismic waves, which are significantly ahead of the explosion front moving along the production, creates conditions for the formation of explosive dust concentration in front of the fire front. But early signaling from the seismic sensor of the presence of an explosion contributes to the formation of an explosion-proof environment to the approach of the fire front and provides prevention of the combustible environment and the creation of a non-combustible zone in the path of the fire front. Scientific novelty. A fundamentally new approach to explosion detection in mining is substantiated and a new design of a device for localization of coal dust explosions based on the disclosure of the mechanism of explosion energy propagation in the mountain environment is proposed. Practical significance. The use of the proposed device for localization of coal dust explosions allows to accelerate the localization of dust explosions, to create an effective barrier from the cloud of extinguishing agent by reliably suppressing the fire front and as a result to create an explosion-proof environment in mining.