Bin Zhao

Bin Zhao

Auto-generated profile, based on publicly available information

Bin Zhao

School of Electrical and Electronic Engineering, Changchun University of Technology, China

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 October 2020 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
BZBin Zhao
Bin Zhao
NXNan Xu
Nan Xu
虹陈虹 陈
虹 陈
KGKonghui Guo
Konghui Guo
YHYANJUN HUANG
YANJUN HUANG
Energy efficiency is extremely important for electric vehicles to improve their driving range. As the motor output energy directly acts on the tire, the tire slip energy generated by tire excessive slip will reduce the effective utilization of motor output energy, resulting in the reduction of energy efficiency, especially in the case of low friction coefficient, or even vehicle instability in some changes, such as slalom change, etc. Therefore, this paper designs an integrated chassis control and verifies the energy utilization. First, based on model predictive control (MPC), an integrated chassis controller is proposed by explicitly incorporating both motor energy and tire slip energy in the main objective function. Second, the reference control actions of the torque distribution method optimized for the motor energy, which facilitates solution-search process of MPC. Then, a semi-empirical UniTire tire slip energy model is proposed for derivation of the tire dissipation energy. Acceleration and stability tests are conducted by four in-wheel independent motor-drive electric vehicles (4WIMD-EVs) on winter proving ground, respectively. The acceleration change results show that both tire dissipation energy and motor output energy are well suppressed to achieve energy-efficient, and the energy utilization ratio of tire dissipation energy to motor output energy is only 35\% to achieve stable acceleration. The slalom change verifies vehicle stability, and the results show that the slip ratio of four wheels only reaches to 0.04, and the motor output energy of four wheels is effectively utilized to generate differential yaw moment.

1 July 2015 in International Journal of Electrical Power & Energy Systems
Verified
Journal Article
Closed access
ZBZhao Bin
Zhao Bin
HLHui Li
Hui Li
MWMingyu Wang
Mingyu Wang
CYChen Yaojun
Chen Yaojun
SLShengquan Liu
Shengquan Liu
Zhe ChenZhe Chen
Zhe Chen

3 March 2021 in Asian Journal of Control
Verified
Journal Article
Closed access
PDF file
HLHewei Li
Hewei Li
BZBin Zhao
Bin Zhao
WYWeiBo Yu
WeiBo Yu
NXNan Xu
Nan Xu
KGKongHui Guo
KongHui Guo

20 July 2023 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
HLHewei Li
Hewei Li
KLKeping Liu
Keping Liu
BZBin Zhao
Bin Zhao
NXNan Xu
Nan Xu
YHYANJUN HUANG
YANJUN HUANG
YYYuming Yin
Yuming Yin
Since the coupling of tire forces, the single longitudinal or lateral vehicle analysis method cannot adequately characterize the vehicle stability, especially the large tire slip ratio under the combined-slip conditions reduces the effective usage rate of tire force, which will increase the risk of vehicle instability. Thus, the effective quasi-usage rate of tire force based on the Monte Carlo method is proposed to solve the constraint of tire slip ratio that can maximize the quasi-usage rate. Firstly, the effective quasi-usage rate $P_{e\!f\!f}$ is proposed, which is a better comprehensive evaluation standard for vehicle stability and tire force usage rate under the combined-slip conditions by employing the Monte Carlo method and $\beta -\dot{\beta }-V_{x}$ phase space; Further, the trend of $P_{e\!f\!f}$ with tire slip ratio is divided into 3 characteristic points and 2 variation stages, the constraint of tire slip ratio is defined by analyzing the characteristics of tire force at different points and stages; Then, the neural network is used to train the data set of constraint to generate the dynamic constraint model, and the objective function of model predictive control strategy considering the constraint of tire slip ratio is established to verify the controller under the combined-slip conditions. The acceleration and deceleration-in-turn are conducted by 4WIMD-EVs on the Hardware-In-the-Loop (HIL) simulation platform. The results show that when the tire slip ratio is controlled under the dynamic constraint proposed in this paper, the vehicle has stronger stability and c.g. acceleration, which also proves the effectiveness of the proposed effective quasi-usage rate.

1 November 2019
Verified
Conference Paper
Closed access
SJSong Jieying
Song Jieying
ZYZhiyong Yu
Zhiyong Yu
XWXie Wei
Xie Wei
Bin HuaBin Hua
Bin Hua
SZShi Zhixiong
Shi Zhixiong
ZYZhang Yifan
Zhang Yifan
In order to reduce the cost of the electromagnetic hybrid unified power flow controller (HUPFC), the thyristor H-bridge ST topology is analyzed. This topology enables the “Sen” Transformer (ST) primary-side winding to achieve a two-stage voltage output. A simple two-stage ST switching strategy is proposed. In order to make the corresponding thyristor reliably turn off when ST is switched, the on-off characteristics and triggering conditions of the thyristor during ST switching are analyzed, and a reliable trigger signal generation circuit for thyristor is designed. The injection voltage estimation and ST switching delay are adopted, which reduces influence of control overshoot on ST switching control, optimizes the control structure of HUPFC, and analyzes the adjustment characteristics of HUPFC. Finally, the HUPFC is capacitated by the actual power flow calculation of distribution ring network, and the simulation model of HUPFC is built under PSCAD/EMTDC software. The steady-state simulation and transient simulation are carried out to verify the power flow control capability of HUPFC and the effectiveness of the control system.

1 March 2024
Verified
Conference Paper
Open access
QWQingxuan Wang
Qingxuan Wang
BZBin Zhao
Bin Zhao
YGYongle Gao
Yongle Gao
HLHewei Li
Hewei Li
ZWZe Wang
Ze Wang
Data is the core part of the training model. In order to make the trained model have stronger performance, a substantial volume of data is frequently necessary. However, data collection and labeling are difficult, so the purpose of data enhancement technology is to expand the data set by transforming and learning existing data to generate new data samples. The current mainstream data enhancement model is Generative Adversarial Networks (GAN). However, this model is prone to overfitting problems during the image generation process, resulting in insufficient richness and low authenticity of the generated images. Therefore, this article proposes an Adaptive normalization data enhancement algorithm based on DCGAN. This model improves the richness of generated images by introducing a deep convolutional neural network, and equips each convolution block with adaptive normalization to ensure that the model will not overfit during the training process. We trained this model on the CIFAR100 dataset, and the experimental results show that the robustness of the model and the realism of the generated images are better than DCGAN.