3 November 2020 in Advanced Energy Materials
14 September 2017 in Nanoscale
A novel saturated heterocyclic organic ionic crystal, piperidinium iodide (PiHI), is synthesized by a facile route and applied as a solid electrolyte in Dye Sensitized Solar Cells (ss-DSSCs). Upon addition of a small quantity of iodine, PiHI self-assembles into a 1D lamellar micro crystalline structure that shows anisotropic conductivity. The two-component PiHI was characterized by using electrochemical impedance spectroscopy, cyclic voltammetry, steady state voltammetry, FT-IR, and Raman spectroscopy. Wide angle X-ray diffraction (XRD) measurement confirms the presence of long range 1D lamellar channels that pave the way for the diffusion of the redox couple I−/I3 − and exhibit high anisotropic conductivity. The ionic conductivity of 1D PiHI (with I2) aligned perpendicular to the electrode, σ⊥ (15.46 mS cm−1), is 1.5 times higher than that aligned parallel to the electrode σ∥ = 10.32 mS cm−1. The ss-DSSC devices with these self-assembled ordered ionic crystals with a carbazole based sensitizer (SK1) achieved a power conversion efficiency (PCE) of 4.2% and 5.2% for ∥al and ⊥ar arrangement, respectively. The reported PCEs are better than that obtained from a classical liquid electrolyte with SK1 sensitizers. The electron kinetics at various interfaces of ss-DSSC devices was evaluated using Electrochemical Impedance Spectroscopy (EIS) measurements. The presence of a saturated cyclic structure promotes close packing through H-bonding and electrostatic interactions, which make ss-DSSC devices more stable up to 600 h under illumination of 1 sun.
21 February 2018 in Journal of Materials Chemistry A
We have synthesized a novel solid organic ionic conductor (SOIC) that acts as a redox mediator and a light absorbing material at the same time. Such dual function of SOICs has not been reported before. It was achieved by substituting N,N′-dimethyl benzimidazolium iodide (BIMI) with hetero-anthracene (phenoxazine (POZ)/phenothiazine (PTZ)) which are labeled as SOIC-1 and SOIC-2, respectively. These substitutions caused the absorption spectrum of BIMI to be extended over 100 nm into the red spectrum and at the same time exhibit excellent redox capability and ionic conductivity. In addition, these synthesized SOICs also enhance the total electron injection into the TiO2 matrix with the metal-free SK3 dye sensitizer. Density functional theory (DFT) was used to optimize the structure and geometrical arrangement of the SOICs. To evaluate the role of PTZ/POZ substitution on BIMI and how pore filling can affect the device performance, solid-state DSSC (ss-DSSC) devices were prepared with two different thickness of TiO2 (8 μm and 12 μm) photoanode. The 8 μm thick TiO2 photoanode with SOIC-1 has an overall PCE of 7.9% which is about 72% higher than the unmodified BIMI (PCE of 4.4%) under AM1.5 illumination. Last but not least, the synthesized SOICs have high thermal stability up to 120 °C which is way beyond the operating temperatures of solar cells which make them ideal for real-world applications.
12 May 2020 in Advanced Functional Materials
16 March 2025 in Small Methods
Electromagnetic interference (EMI) significantly affects the performance and reliability of electronic devices. Although current metallic shielding materials are effective, they have drawbacks such as high density, limited flexibility, and poor corrosion resistance that limit their wider application in modern electronics. This study investigates the EMI shielding properties of 3D‐printed conductive structures made from polylactic acid (PLA) infused with 0D carbon black (CB) and 1D carbon nanotube (CNT) fillers. This study demonstrates that CNT/PLA composites exhibit superior EMI shielding effectiveness (SE), achieving 43 dB at 10 GHz, compared to 22 dB for CB/PLA structures. Further, conductive coating of polyaniline (PANI) electrodeposition onto the CNT/PLA structures improves the SE to 54.5 dB at 10 GHz. This strategy allows fine control of PANI loading and relevant tuning of SE. Additionally, the 3D‐printed PLA‐based composites offer several advantages, including lightweight construction and enhanced corrosion resistance, positioning them as a sustainable alternative to traditional metal‐based EMI shielding materials. These findings indicate that the SE of 3D‐printed materials can be substantially improved through low‐cost and straightforward PANI electrodeposition, enabling the production of customized EMI shielding materials with enhanced performance. This novel fabrication method offers promising potential for developing advanced shielding solutions in electronic devices.