Jae Seong Lee

Jae Seong Lee

Auto-generated profile, based on publicly available information

Jae Seong Lee

Department of Electronics and Computer Engineering, Hanyang University, Seoul, South Korea

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
DJDuhyun Jeon
Duhyun Jeon
JBJong Hak Baek
Jong Hak Baek
YKYong-Duck Kim
Yong-Duck Kim
JLJaeseong Lee
Jaeseong Lee
DKDong Kyue Kim
Dong Kyue Kim
BCByong-Deok Choi
Byong-Deok Choi
This article proposes a physical unclonable function (PUF) based on the contact formation probability. The contact here is the interconnect layer between the metal and the silicon in a chip. As the contact is designed smaller than the size given in the design rule, the contact formation becomes stochastic in a certain range of contact hole sizes and can be a random source for the PUF. Consequently, once the contact state is determined to be either open or short, its connectivity does not change over time under noisy environmental conditions, such as temperature, supply voltage, humidity variations, and so on. The reliability of the proposed contact PUF is verified through seven reliability tests defined by the Joint Electron Device Engineering Council (JEDEC) standards. No bit errors occur in any of the 366 chips tested. The bitcell is designed using a digital standard cell structure and scattered throughout the chip embedded in other logic gates. This makes it difficult to find the bitcell position. The proposed contact PUF is fabricated using 0.13-μm CMOS technology. It achieves 49.99% uniqueness and 0.99973 entropy and passes all applicable randomness tests given by the National Institute of Standards and Technology (NIST) SP 800-22.

2 March 2022 in IEEE Access
Verified
Journal Article
Open access
JLJae Seong Lee
Jae Seong Lee
PCPiljoo Choi
Piljoo Choi
DKDong Kyue Kim
Dong Kyue Kim
In this study, we propose a lightweight and low-latency advanced encryption standard (AES) accelerator. Instead of being connected to the bus through its own slave wrapper, the proposed AES accelerator is located within the slave wrapper of the static random-access memory (SRAM) and is directly attached to the SRAM. Hence, the AES accelerator can directly access data in the SRAM and share SRAM space for storing expanded keys, resulting in no time for transferring input and output data, no resource usage for storing keys, and no power wastage for repeated key expansion. The proposed AES accelerator has a latency of 53 clock cycles per encryption/decryption process and has a gate count of 2912 when synthesized using 28 nm process technology. The latency is similar to that of another AES accelerator with the same 32-bit data path; however, the size of the proposed accelerator is 46.0% smaller. Furthermore, compared with other AES accelerators with 8-bit data path, the proposed AES accelerator has a 3.0–22.0 times smaller latency with a slightly larger area.