Yong-Duck Kim

Yong-Duck Kim

Auto-generated profile, based on publicly available information

Yong-Duck Kim

Electronics and Telecommunications Research Institute, Daejeon, Republic of Korea

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
DJDuhyun Jeon
Duhyun Jeon
JBJong Hak Baek
Jong Hak Baek
YKYong-Duck Kim
Yong-Duck Kim
JLJaeseong Lee
Jaeseong Lee
DKDong Kyue Kim
Dong Kyue Kim
BCByong-Deok Choi
Byong-Deok Choi
This article proposes a physical unclonable function (PUF) based on the contact formation probability. The contact here is the interconnect layer between the metal and the silicon in a chip. As the contact is designed smaller than the size given in the design rule, the contact formation becomes stochastic in a certain range of contact hole sizes and can be a random source for the PUF. Consequently, once the contact state is determined to be either open or short, its connectivity does not change over time under noisy environmental conditions, such as temperature, supply voltage, humidity variations, and so on. The reliability of the proposed contact PUF is verified through seven reliability tests defined by the Joint Electron Device Engineering Council (JEDEC) standards. No bit errors occur in any of the 366 chips tested. The bitcell is designed using a digital standard cell structure and scattered throughout the chip embedded in other logic gates. This makes it difficult to find the bitcell position. The proposed contact PUF is fabricated using 0.13-μm CMOS technology. It achieves 49.99% uniqueness and 0.99973 entropy and passes all applicable randomness tests given by the National Institute of Standards and Technology (NIST) SP 800-22.

6 May 2024 in Journal of the Society for Information Display
Verified
Journal Article
Closed access
HSHyeon‐Jun Shin
Hyeon‐Jun Shin
YKYong‐Duck Kim
Yong‐Duck Kim
BCByong-Deok Choi
Byong-Deok Choi

20 September 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
KKKyeong-Soo Kang
Kyeong-Soo Kang
HKHee-Ok Kim
Hee-Ok Kim
JYJong-Heon Yang
Jong-Heon Yang
JPJae-Eun Pi
Jae-Eun Pi
YKYong-Duck Kim
Yong-Duck Kim
SLSoo-Yeon Lee
Soo-Yeon Lee
In this article, we propose a pixel circuit suitable for depletion-mode oxide thin-film transistors (TFTs) to drive micro-light-emitting diode ( $\mu $ LED) with pulse width modulation (PWM). In the proposed pixel circuit, both the constant current generation (CCG) part and the PWM part compensate for the variation in the threshold voltage ( ${V}_{\text {TH}}$ ) of the driving TFT (DRT) through a source-follower structure and store the data voltage entirely without capacitive division. By avoiding voltage division, the data range and the corresponding control signal range can be reduced, lowering the switching power. The operation of the proposed pixel circuit is verified and compared with the conventional pixel circuit through simulation using HSPICE from Synopsys, employing an oxide TFT model based on measured data from the fabricated device. In addition, the proposed circuit is experimentally validated through circuit fabrication. Both simulation and experimental results exhibit consistent PWM driving, indicating accurate compensation for variations in both parts, along with enhanced operation.

4 June 2019 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
YKYong-Duck Kim
Yong-Duck Kim
JKJong-Seok Kim
Jong-Seok Kim
JLJong-Il Lee
Jong-Il Lee
KHKi-Lim Han
Ki-Lim Han
BKBeom-Su Kim
Beom-Su Kim
BCByong-Deok Choi
Byong-Deok Choi
Prior research has reported that the device characteristics of amorphous indium-gallium-zinc-oxide (a-IGZO) TFTs have been changed by instabilities due to electrical stress. Because positive bias stress and high current stress produce a positive threshold voltage shift, if the digital logic circuit is designed using a-IGZO TFTs, there is high possibility that the circuit suffers from malfunction. In this paper, the dynamic and the static logic circuits using n-type a-IGZO TFTs are compared in terms of stability for electrical stress. In order to compare the stability of the two circuits, DC and AC signals are applied. The measurement results suggest that the dynamic logic circuit is much more stable than the static logic circuit regarding electrical stress.

30 May 2025 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
JPJi-Hwan Park
Ji-Hwan Park
KKKyeong-Soo Kang
Kyeong-Soo Kang
CPChanjin Park
Chanjin Park
HKHee-Ok Kim
Hee-Ok Kim
JYJong-Heon Yang
Jong-Heon Yang
SLSoo-Yeon Lee
Soo-Yeon Lee
We propose a 16T5C oxide thin-film transistor (TFT) micro light-emitting diode (μLED) pixel circuit that enables accurate low gray-level expression by employing a sweep generator (SG) that generates a ramp-shaped sweep voltage signal within the pixel circuit. The slope of sweep voltage signal increases as the data voltage changes to low gray levels. Consequently, with decreasing gray levels, both falling and emission times are reduced. The measurement results confirm that the proposed circuit can express up to 16 gray levels, with the emission and falling times of 11.32 and 3.8 μs, respectively. Additionally, simulation results show that the circuit compensates for threshold voltage fluctuations in the driving transistor, achieving a relative average current error rate of 13% across all gray levels under a ±0.5 V variation in threshold voltage.

22 January 2021 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
YKYong-Duck Kim
Yong-Duck Kim
KHKi-Lim Han
Ki-Lim Han
JKJun-Hyeok Kim
Jun-Hyeok Kim
JLJong-Il Lee
Jong-Il Lee
WLWon-Bum Lee
Won-Bum Lee
BCByong-Deok Choi
Byong-Deok Choi
The dynamic inverter using amorphous indium-gallium-zinc oxide thin-film transistors (a-IGZO TFTs) is revealed to be more robust to tensile strain than the static inverter that is most widely used in TFT circuits. The results with the inverters can be reasonably extended to NAND or NOR gates, because all of them are commonly composed of pull-up and pull-down networks. The experimental results after tensile bending up to 20 000 times with a bending radius of 1.5 mm show that ΔVOH and ΔVOL in the dynamic inverter decrease to 85% and 0% of those in the static inverter, respectively. Also, while the power consumption of the static inverter increases by 36%, which is tens of μA, the dynamic inverter maintains low-power consumption, which is tens of nA. It is also worth noting that ratioed design and TFT operation in the saturation region make the circuit more sensitive to tensile strain than ratio-less design and TFT operation in the triode region.