13 January 2023 in Journal of Power Sources
13 March 2019 in Journal of the Electrochemical Society
A computational study is performed to analyze oxygen transport in dry and wet stochastically reconstructed catalyst layers (CLs). CL stochastic reconstructions are generated using random penetrating spheres of a given particle size that agree with the statistical correlation functions of a reference 3D FIB-SEM reconstruction. A nucleation-based full morphology approach is used to partially flood the CLs from within the structure in an attempt to reproduce the conditions in an operating fuel cell. In order to validate the 3D numerical model and reconstruction method, the dry effective diffusivity of CLs and its variation with porosity are obtained and shown to be in agreement with reported literature data. Simulations are then performed for CLs with varying porosity and saturation. Statistical analysis is used to estimate an expression for effective Knudsen radius as a function of porosity and particle size, and then the computed dry effective diffusivities are used to develop a generalized percolation-based correlation function to estimate dry and wet effective diffusivities. The effective diffusivity of CLs with different pore size distribution are also obtained from 3D simulations and using the proposed correlation function and shown to differ by less than 10% for porosities in the range of 0.4-0.7.
1 June 2021 in Journal of the Electrochemical Society
Improvements in imaging techniques have enabled the reconstruction of complex porous media which can be analyzed by computer simulations. The two most popular methods for numerical analysis of transport in porous media are direct numerical simulation (DNS) and pore network modeling (PNM). This work aims at assessing the suitability of these techniques to study dry and wet transport properties of porous transport layers for fuel cells and electrolyzers by comparing numerical predictions to experimental data for mercury intrusion, and transport properties. The microstructures of different materials are obtained using micro X-ray computed tomography and characterized by measuring mercury intrusion porosimetry (MIP) curves, dry permeability and diffusivity. Their results are compared to numerically predicted MIP, and dry and wet permeability and diffusivity. Results show that DNS is capable of accurately predicting intrusion, and transport properties without using any fitting parameters. Accurate predictions could be achieved with a PNM when the inscribed diameter method was used for pore size distribution, and the equivalent diameter was used to estimate pore transport properties. While DNS provides more accurate results without necessitating any calibration, a properly constructed PNM is shown to provide relatively good estimations of transport properties at a reduced computational expense.
17 May 2018 in Journal of the Electrochemical Society
A cluster based full morphology (CFM) model is developed to predict liquid water intrusion in GDLs. The CFM model is used to simulate water intrusion into a dry GDL microstructure obtained from μ-CT. Numerical water saturation distributions are compared to experimental μ-CT reconstructions of the same GDL sample at varying saturation levels. A quantitative validation of the CFM model results is then provided by studying the number of voxels in the image that contain water in both the CFM model results and the μ-CT reconstructions. Results reveal that CFM simulations showed 56–95.7% agreement in the liquid water voxels when compared to the μ-CT simulations for saturations in the range of 29–92.3%. Gas transport simulations are then performed on μ-CT and CFM partially saturated GDLs in order to study the validity of the CFM model images to estimate transport properties of partially saturated GDLs. A maximum error of 20% was observed between the predicted effective diffusivities obtained from CFM simulations and those obtained directly from simulations on the μ-CT data for saturations below 40%. Effective diffusivity predictions from the CFM simulations agree well with in-plane effective diffusivities in literature while the through-plane effective diffusivities were underpredicted by a factor of 2.
1 March 2021 in Journal of Power Sources
31 May 2022 in Journal of Power Sources