2 August 2020 in Transactions on Electrical and Electronic Materials
8 April 2022 in Semiconductor Science and Technology
One of the severe issues of the downscaling of semiconductor devices is the threshold voltage reduction which significantly increases the leakage current. Thus, high threshold voltage (HVT) techniques are required to bring down the leakage hike for improved performances. In this paper, for the first time, we investigate the analog/radio frequency (RF) and linearity performances of silicon (Si) FinFET by employing HVT techniques. Using well-calibrated technology computer aided design models, to mitigate the leakage current, we analyzed the following approach to get HVT: (a) increasing channel doping (N ch′); (b) making drain-side underlap (L dsu); (c) increasing gate length (L g′). Two flavors of fin field effect transistors (FinFETs) viz bulk and silicon-on-insulator (SOI) are suitably compared over their baseline counterpart, i.e. without HVTs. A thorough investigation of analog/RF metrics such as transconductance, output resistance, gate capacitance, cut-off frequency, gain-bandwidth, and transconductance-frequency product proves the eminence of bulk-FinFET over its peer SOI-FinFET. In contrast, SOI-FinFET shows merits in intrinsic gain and linearity such as g m2, g m3, VIP2, VIP3, IIP3, IMD3, and 1 dB compression point. Thus, HVT techniques are worth analyzing for a FinFET architecture employed in analog/RF applications.
1 January 2022 in Microelectronics Journal
1 February 2021 in IEEE Transactions on Electron Devices
łabelABPhase transition FinFET (PT-FinFET) is an emerging steep slope device that utilizes phase transition material (PTM) at the source of the host FinFET to achieve steep switching and boost Ion/Ioff ratio compared to conventional transistors. Due to nonzero ρ_MET of the assisting PTM, PT-FinFET suffers from low Ion as compared to baseline FinFET. To address this issue, we propose, analyze, and mathematically justify a device design exhibiting enhanced subthreshold swing (SS), Ion and Ioff by exploiting a negative capacitance material at the gate of the PT-FinFET. In the proposed model, critical thickness (tfe) of 3 nm for negative capacitance material was achieved. In comparison with the baseline FinFET and negative capacitance PT-FinFET, the proposed device (NC-PT-FinFET) is able to improve Ion/Ioff ratio by 3.02 and 2.94 decades, respectively. Furthermore, SS of nearly 10 mV/decade is achieved over 4 decades of drain current with minimum value of 6.8 mV/decade for tfe = 3 nm.
23 November 2021 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
An enormous study is being carried out in the field of emerging steep slope devices, specifically on negative-capacitance-based and phase transition-based devices. This article investigates the action of ferroelectric (FE) and phase transition material (PTM) on a hybrid device, negative-capacitance-assisted phase transition FinFET (NC-PT-FinFET). We encounter several unique phenomena resulting from this unified action and provide valid arguments based on these observations. A significant enhancement in the differential gain and transconductance, a unique variation in the effect of PTM on drain-channel coupling, tunability of hysteresis across PTM by FE thickness( ${t}_{\text {fe}}$ ), and ultralow subthreshold slope (SS) by lowering both of its factors are some of the major outcomes of the NC-PT-FinFET. Focus is built on comprehending the individual role of FE and PTM in the intriguing features observed in every device performance parameter with the help of mathematical expressions and physical interpretations. Various tunable parameters present in this hybrid device widen its applicability in digital and memory applications.
14 March 2022 in Microelectronics Journal